Hitachi P50S601 important safety instructions Set The Inputs, Input 3 Auto Link, Off

Setup

Set The Inputs

Use this feature to give a name to any of the video inputs.

1. Press the CURSOR PAD ￿, ￿ to highlight the video inputs.

2.Press the CURSOR PAD ￿, ￿ to select your choices.

Note: The inputs labeled Gray out (Skip) or Hide (Skip) are disabled in the INPUTS selection.

OR

INPUT 3 Auto Link

Use this function to automatically turn the TV on and tune to INPUT 3 when it detects a video signal to INPUT 3.

Setup

Set The Inputs

Input1 : ****

Input2 : ****

Input3 : ****

Auto Link : Off

Input-Front : ****

HDMI1 : ****

HDMI2 : ****

HDMI -Front : ****

Move SEL Return

On-Screen Display

1.Use the CURSOR PAD ￿ or ￿ to highlight the AUTO LINK option and ￿ or ￿ to select between the Off and Auto settings.

Auto

When AUTO is selected, the TV will turn on and switch to INPUT 3 automatically, when the INPUT 3 input device is turned on. This is convenient when you want to watch a movie with your VCR, laserdisc player, or DVD player.

Off

Select OFF to disable this function.

2.Press EXIT to quit menu or select SET THE INPUTS to return to previous menu.

NOTE: 1. Once the TV has been turned on using the AUTO LINK feature, it must be reset before AUTO LINK is used again. To do this, turn your VCR, laserdisc, or DVD player OFF. This feature is now reset and will turn on your TV as described above.

2. If no remote control button is pressed after the TV is turned on by AUTO LINK, the TV will automatically turn off after three hours.

54