Front Panel Controls
FRONT VIEW
! *
#
PUSH TO OPEN CONTROL DOOR
First time use
UPGRADE CARD
(SERVICE USE ONLY)
PUSH EJECT
"$
Press this button to turn the Plasma Television ON/OFF. It can also be turned ON/OFF by remote control. The “MAIN POWER” button must be at
%MENU/SELECT button
This button allows you to enter the MENU, making it possible to set TV features to your preference without using the remote. This button also serves as the SELECT button when in MENU mode.
$
Use the front HDMI input for external devices such as
(INPUT/EXIT button
Press this button to access the INPUT menu. Press again to exit the MENU mode.
&CHANNEL selector
Press these buttons until the desired channel appears in the top right corner of the TV screen. These buttons also serve as the cursor down () and up () buttons when in MENU mode.
'VOLUME level
Press these buttons to adjust the sound level. The volume level will be displayed on the TV screen. These buttons also serve as the cursor left () and right () buttons when in MENU mode.
FRONT PANEL CONTROLS
) | % ( ' & |
#POWER button
Television MAIN POWER button
This power button is for the complete system, and
must be turned ON/OFF manually. It is recommended to leave the “MAIN POWER” to ON condition (lights red) for
The Main Power button is located on the broadside bottom, under the mark " ".
NOTE: When the “MAIN POWER” button is set to OFF or the TV is unplugged, the clock will stop and may eventually reset itself.
"
This card slot is for future software upgrades. Hitachi will notify you if a software upgrade is required for your TV. In order to receive written notification, please complete and return your warranty card.
11