VIDEO
Reset Video
Settings
This function allows you to Reset the Video Menu Settings of the present input and return it to the Day VIDEO mode.
Video |
| ANT A/B |
|
Picture Mode | Day | Night | |
Contrast | 100% |
| |
Brightness | 50% |
| |
Color |
| 50% |
|
Tint |
|
|
|
Sharpness | 50% |
| |
Color Temperature | High |
| |
Black Enhancement | Middle |
| |
Contrast Mode | Dynamic |
| |
Back Light | 100% |
| |
Reset Video Settings |
|
| |
Move | SEL Select |
|
|
or
Video |
|
Picture Mode |
|
Select “Reset” to return the Video | |
menu Settings on this input to the | |
original | factory settings . |
| R e s e t |
Move | SEL Return |
Use CURSOR PAD or to highlight functions.
Press the SELECT button or CURSOR PAD to select Reset Video Settings.
Use the CURSOR PAD to access at the Reset softkey. Press the SELECT button to Reset the Video Settings.
You can customize each of the Video Inputs to your preference to increase viewing performance and pleasure, depending upon the video program being viewed. If RESET is selected, only the selected Input will reset to the initial conditions as explained above.
If RESET is selected in Video:1 Input, only Video:1 Input will return to factory conditions.
Video |
| ANT A/B |
|
Picture Mode | Day | Night | |
Contrast | 100% |
| |
Brightness | 50% |
| |
Color |
| 50% |
|
Tint |
|
|
|
Sharpness | 50% |
| |
Color Temperature | High |
| |
Black Enhancement | Middle |
| |
Contrast Mode | Dynamic |
| |
Back Light | 100% |
| |
Reset Video Settings |
|
| |
Move | SEL Select |
|
|
Video |
| ANT A/B |
Color Management |
| |
Color Decoding |
| |
Auto Color | Off | |
Noise Reduction | Low | |
Auto Movie Mode | Off | |
Move | SEL Select |
|
Use this function to adjust and balance the listed individual colors to make them either deeper or more Color Management pure depending on the user’s preference. Adjust the GAIN settings to make the color brighter (+) or
darker
ON
Video |
|
|
Color Management |
| |
Color Decoding |
| |
Auto Color | Off | |
Noise Reduction | Low | |
Auto Movie Mode | Off | |
Move | SEL Select |
|
or
Video |
|
|
Color Management |
| |
| Set User Colors | |
| Phase | Gain |
Magenta | 50% | 50% |
Red | 50% | 50% |
Yellow | 50% | 50% |
Green | 50% | 50% |
Cyan | 50% | 50% |
Blue | 50% | 50% |
Reset |
|
|
Move | SEL | Return |
-SCREEN DISPLAY
Use the CURSOR PAD or to highlight function.
Press the SELECT button or CURSOR PAD to select User Colors setting. When the function has a “ ” in the box called “Set User Colors”, it is ON.
Press the CURSOR PAD | , | , , and SELECT button to highlight and adjust individual colors. |
Use the CURSOR PAD | and | to highlight and select “Reset” then press the SELECT button to return all colors to default settings. |
NOTE: When the Set User Colors box is not checked , the listed colors will be grayed out.
59