Hitachi 32HLX61 important safety instructions Hookup Cables

Page 7

HOOKUP CABLES

Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell audio/video products. Below are illustrations and names of common connectors. Before purchasing any cables, be sure of the output and input connector types required by the various components and the length of each cable.

300-Ohm Twin Lead Connector

This outdoor antenna cable must be connected to an antenna adapter (300-Ohm to 75-Ohm).

Phono Connector

Used on all standard video and audio cables which connect to inputs and outputs located on the rear jack panel and front control panel.

“F” Type 75-Ohm Coaxial Antenna Connector

For connecting RF signals (antenna or cable TV) to the antenna jack on the television.

S-Video (Super Video) Connector

This connector is used on camcorders, VCRs and laser- disc players with an S-Video feature in place of the standard video cable to produce a high quality picture.

FIRST TIME USE

AUDIO OUT

2

3.8mm

STEREO

RCA TYPE

MINI-PLUG

PLUGS

Stereo Cable (3.5 mm plug to 3.5 mm plug)

This cable is used to connect from external audio out to the audio input of the AVC Center (ex. RGB Input).

IR Mouse Cable (Provided)

Connect the IR Mouse to the IR output on your AVC center when A/V Network is used. You must place the IR mouse in front of the corresponding IR window of your cable box and VCR. This connection allows your TV to control your cable box and VCR.

5

4

3

2

 

1

10

9

8

7

6

15

14

13

12

 

11

D-SUB MINI 15-Pin Cable

This cable is used to connect a computer output to the ANALOG input located on the rear panel of the AVC Center. The resolution should be set correctly to display the signal on the LCD Television.

Subwoofer Cable (Provided)

This cable is used to connect an external audio component input to the subwoofer output of the Display Monitor.

Optical Cable

This cable is used to connect to an audio amplifier with an Optical Audio In jack. Use this cable for the best sound quality.

HDMI Cable

This cable is used to connect your external devices such as Set-Top-Boxes or DVD players equipped with an HDMI output connection to the TV’s HDMI input.

IEEE1394 Cable

 

This cable is used to connect your digital television to

 

external digital devices.This cable will carry both the

 

video and audio information.

7

Monitor Connection Cable (Provided)

This cable is used to connect the Display Monitor to the AVC Center.

1 2 3 4 5

6 7 8 9

D-SUB MINI 9-Pin Cable

This cable is used to connect to the RS232C input located on the rear panel so you can control some of your TV functions from an external home control system.

USB Cable

This cable is used to connect your digital camera to the Photo Input in the front of the AVC.

Image 7
Contents Operating Guide for 32HLX61 Do not Open Important Safety InstructionsPublic Viewing of Copyrighted Material Read before operating equipmentFirst AccessoriesUSE TimeAntenna HOW to Setup Your NEW Hitachi LCD TelevisionFirst Time USE Securing to a wallVertical Viewing Angle HOW to SET UP Your NEW Hitachi LCD TelevisionViewing BestHookup Cables VHF 75-Ohm antenna/CATV Cable TV When both VHF and UHF antennas are connectedAntenna Connections to Rear Panel Jacks First TimePhoto Input Front Panel ControlsPhones Jack Monitor OUT Rear Panel JacksRGB Analog Input SUB-POWER buttonUpgrade Card To Power Swivel ConnectorRear Panel of AVC CableCARD SlotConnecting LCD Display Monitor to AVC BOX Connecting External Video Sources Before Operating External Video Source Connecting a Monaural Audio Source to INPUT1~INPUT5Connecting a Stereo VCR or Stereo Laserdisc Player Connecting S-VIDEO VCR or Laserdisc Player Hdmi input VideoDVI to Hdmi Input See page 28 for tips on Rear Panel Connections Digital VCR D-VHS Connecting External Audio Amplifier Connecting External AUDIO/VIDEO DevicesConnecting AV Network To set the Input to which AV Network Setup WizardSetup Procedure Using AV Network Device Codes Cursor PadsOn the connections Cursor PADTo set the Internal Speakers to OFF or TV as CenterAUDIO/VIDEO Codes for AV Network not for remote control Time USE Rear Panel ConnectionsTips on Rear Panel Connections Remote Control Remote ControlHOW to USE the Remote To Control Your LCD TV Standard Aspect buttonExpanded Guide button DAY/NIGHT buttonPICTURE-IN-PICTURE button Menu buttonAV NET button ControlPress Exit to Quit AV NET Learning WizardSelect the preferred TV Softkeys Ex Press the Select buttonRemote Ieee Photo Input Ant BAnt a InputJump Rotate SlideshowWhen an IEEE1394 device is connected Digital Channels When an S-VIDEOInfo button Analog ChannelsLast Channel LC button Volume VOL WHEEL, Mute buttonChannel CH WHEEL/CHANNEL Selector buttons Dash buttonPIP button POP Mode PICTURE-IN-PICTUREPress the Cursor PAD or to enable the sub-picture sound PICTURE-IN-PICTURE PIPNtsc PIP Mode PICTURE-IN-PICTURESplit Mode PICTURE-IN-PICTURE Surf Mode PICTURE-IN-PICTURESplit Freeze Main FreezeStrobe Freeze Exclusive TV buttons HOW to USE the Remote To Control Cable BOX FunctionsOperating the precoded function for your cable box Precoded Cable BOX buttonsPRE-CODED SET-TOP-BOX/SATELLITE Receiver buttons These buttons transmit the chosen precoded DVD codes HOW to USE the Remote To Control DVD FunctionsOperating the precoded function for your DVD player Precoded DVD ButtonsPrecoded VCR/PVR Buttons HOW to USE the Remote To Control VCR/PVR FunctionsThese buttons transmit the chosen precoded VCR/PVR codes Operating the precoded function for your Audio component HOW to USE the Remote To Control Additional Audio EquipmentPrecoded Audio Buttons Input Access VCR Brand Audio Brand Simple Remote ON-SCREEN Display OSD On-Screen DisplayFor VideoChannel Manager Locks Timers Setup Power Swivel Video Picture ModeBack Light ContrastVideo Reset Video SettingsANT A/B, Video 480p/720p/1080i Noise Reduction Auto Movie ModeColor Decoding NaturalAudio Audio Language Digital OutputVertical Position AspectAspect Auto AspectPress Cursor PAD To highlight Ant a or Ant B Channel ManagerSet The Antenna Auto Channel ScanChannel List Signal MeterLocks Movie Ratings TV Ratings Eng Canadian RatingsCanadian Ratings English Table Programming restricted to adults Contains FrnCanadian Ratings French Table Programming is not suitable for childrenSet The Clock TimersSet Day/Night Timer Set Sleep TimerPlease Set Clock First Set Event TimerSet Timer Recording Display SetupMenu Preference Saver Image PowerMenu Background ScreenSet The Inputs Video 2 Auto Link ON-SCREENSet Black Side Panel Caption Display On/Off will turn the display on or off Auto will turn Display on when Mute/Soft Mute is onCaption Mode Set Closed CaptionSet AV Control This feature will select the source of the Monitor OutputSet Monitor Out CableCARD InfoSet Stand-By Mode UpgradesPower Swivel Vesa RGB on Screen DisplayVGA Using the RGB Input No SYNC. Signal Invalid Scan Freq Shows which Remote This part of the screenRGB Input UsingBrightness This feature allows you to adjust brightness in RGB ModeColor Temperature ContrastAspect ResetEnhancer Back LightPosition UsingAdjusts the phase to correct blurred or unstable images Clock PhaseHorizontal Clock Black Side Using the RGBPower Swivel Input LevelDo not Care of Your Hitachi LCD Display Your Remote ControlSnow Reception ProblemsIgnition Noise GhostsUseful Info SymptomsPicture Image Spectrum Important NotesTrademark Acknowledgment Plug and PlayAgency Regulatory Information Outputs InputsRGB, Video Hitachi Way Chula Vista, CA Home Electronics DivisionDigital Media Division Index Accessories23-26 Or the Software END User License Agreement for Hitachi DTV Software103 QR64521