Emerson LD195EM8 7 5Picture Adjustment, 5Closed Caption, Brightness Contrast, Tint Sharpness

5Picture Adjustment

You can adjust brightness, contrast, color, tint and sharpness.

1Press [PICTURE] to adjust the picture quality.

2Use [Cursor K / L] to select the picture quality type you want to adjust.

BRIGHTNESS

CONTRAST

orCOLOR

TINT

SHARPNESS

3Use [Cursor s / B] to adjust the quality.

or

	Cursor s	Cursor B
BRIGHTNESS	to decrease brightness	to increase brightness
CONTRAST	to decrease contrast	to increase contrast
COLOR	to decrease color	to brighten color
TINT	to add red	to add green
SHARPNESS	to make soft	to make clear

4Press [RETURN ] to exit.

Note:

•The picture adjustment setting display will automatically disappear in a few seconds.

•In PC mode, you can select only “BRIGHTNESS“ or “CONTRAST“.

5Closed Caption		INTRODUCTION
TV
You can view closed captioning (cc) for TV programs, movies and news.
Closed caption refer to text of dialogue or descriptions displayed on-screen
for the hearing impaired.		PREPARATION
1 Press [SETUP] to display the main menu.
2 Use [Cursor K / L] to select “CAPTION”, then press		INITIAL
[ENTER] repeatedly to change the setting.		SETTING
e.g.) digital TV mode
- TV SETUP	-
CHANNEL SETUP
V-CHIP SETUP
LANGUAGE	[ENGLISH]
CAPTION	[OFF]	WATCHING
or	[BRIGHT]
BACK LIGHT
COLOR TEMP.	[NORMAL]
DTVCC
		TV
OFF
CAPTION1 - 4		OPTIONAL
TEXT1 - 4
		SETTING
Caption Mode
CAPTION1 and TEXT1;
are the primary caption and text services.
The captioning or text is displayed in the same		OPERATING
language as the program’s dialogue
(up to 4 lines of script on the TV screen, where it does
not obstruct relevant parts of the picture).		DVD
CAPTION3 and TEXT3;
serve as the preferred data channels.
The captioning or text is often a secondary language.
CAPTION2, CAPTION4, TEXT2 and TEXT4;		DVD
are rarely available and broadcasters use them
only in special conditions, such as when “CAPTION1”		SETTING
and “CAPTION3” or “TEXT1” and “TEXT3” are not
available.
• There are 3 display modes according to programs:
Paint-on mode: Displays input characters on the TV		TROUBLESHOOTING
screen immediately.
Pop-on mode: Once characters are stored in
memory, they are displayed all at
once.
Roll-up mode: Displays the characters continuously
by scrolling (max. 4 lines).
		INFORMATION

21

EN