Emerson LD195EM8 7, LD195EM8 2 Black Level Setting, Stereo Sound Mode, Virtual Surround

Black Level Setting

DVD

Adjust the black level to make the dark areas of the TV picture brighter.

1During playback, press [MODE] repeatedly until ““ appears.

OFF (BLACK LEVEL)

2Use [Cursor K/ L] to adjust the black level.

or ON (BLACK LEVEL)

ON : Makes the dark areas brighter.

OFF : Shows the original picture as recorded.

3Press [RETURN ] to exit.

Note:

• The setting will be kept even if the unit is turned off.

Stereo Sound Mode

CD

This unit allows you to select a sound mode during audio CD playback.

During playback, press [AUDIO ] repeatedly until the desired sound mode appears.

STEREO

•Each time you press [AUDIO ], the sound mode changes as example below.

STEREO (stereo sound with left and right channels)

L-ch(left channel sound only)

R-ch(right channel sound only)

INTRODUCTION

Virtual Surround

You can enjoy virtual surround on your existing 2 channel stereo system.

						PREPARATION
1 During playback, press [MODE] repeatedly until
	“			“ appears.
					OFF (SURROUND)
						INITIAL
						SETTING
2 Use [Cursor K/ L] to select the sound level.
				or
					1 (SURROUND)
1						WATCHING
				: Natural effect
2				: Emphasized effect		TV
	OFF : No effects (original sound)
3 Press [RETURN ] to exit.
						OPTIONAL
						SETTING
		Note:
		• The setting will be kept even if the unit is turned off.
		• For audio CD, virtual surround will not be effective if the
			sound mode is set to something other than “STEREO”.			OPERATINGDVD
			(Refer to “Stereo Sound Mode” on page 37.)
		• Turn down the level or select “OFF” if the sound is distorted.
						DVD SETTING
						TROUBLESHOOTING
						INFORMATION

37

EN