![](/images/new-backgrounds/1125130/12513059x1.webp)
OPERATING DVD
5Playback | 5Disc Menu |
Before you begin: | DVD |
Turn on the amplifier and any other device which is connected to this unit. Make sure the external audio receiver (not included) are set to the correct input mode.
1Press [POWER] to turn on the unit.
2Insert the disc with label side facing forward.
# CAUTION
• Do not put coins or foreign objects into the disc loading slot.
Some discs contain disc menus which describe the contents of the disc or allow you to customize disc playback, or title menu which lists the titles available on the DVD.
To display the DVD menu, press [MENU] and use [Cursor K / L / s / B] to select an item, then press [ENTER] (or [PLAY B]).
To display the top menu, press [TOP MENU] and use [Cursor K / L / s / B] to select an item, then press [ENTER] (or [PLAY B]).
Note:
•Menu operations may vary depending on the disc.
Refer to the manual accompanying the disc for more details.
5Resume Playback
•In case the DVD was recorded on both sides, make sure the label side you want to play back is facing forward.
3The unit switches to the DVD mode when the unit was in TV mode and detects the type of disc.
e.g.) DVD
DVD
• Press [PLAY B] if the unit does not go to the DVD mode.
4The disc starts playback.
•If playback does not start automatically, press [PLAY B] again.
5Press [STOP C] to stop playback temporarily.
•If playback remains stopped for 20 minutes, the unit will turn itself off automatically when “AUTO POWER OFF“ is set to “ON“.
6Press [EJECT A] to eject the disc.
Press [STOP C] during playback. |
|
|
|
| |
Resume message will appear on |
|
|
| Resume ON | |
the TV screen. |
|
|
Press 'PLAY' to play from here. | ||
Press [PLAY B]. Playback will | To play the beginning, | |
press 'STOP' first and then 'PLAY'. | ||
resume from the point at which |
|
|
playback was stopped. |
|
|
Note:
•To cancel resume, press [STOP C] one more time in the stop mode. On some discs, [STOP C] will not work while the resume message appears. Please wait until the message disappears.
•The resume information will be kept even when unit is turned off. However, ejecting the disc will cancel the resume feature. Playback will start at the beginning the next time you insert the disc.
5Skip
During playback, press [SKIP H / G] repeatedly to skip chapters, titles or tracks to a desired point. Playback will start automatically from the chapter, title or track you selected.
Note:
•[SKIP H / G] are not available when playback is stopped.
•Chapter/title/track search can only be performed during playback or when the unit has kept the resume information. It cannot be performed in the stop mode.
•Chapter/title search is not available with some DVD.
5Fast Forward / Fast Reverse
Note:
• “” may appear at the
• Some DVD may start playback from title 2 |
or 3 due to specific programs. |
• During the playback of a |
a moment. This happens while the 1st layer is being switched |
to the 2nd layer. This is not a malfunction. |
Press and hold [REV /h] or [FWD /g] repeatedly during playback to select the desired forward or reverse speed.
To continue playback, press [PLAY B].
Note:
E 1
• When you cannot remove the disc, you may try either |
following operations. |
- Press and hold [EJECT A] on the unit for more than 5 seconds. |
- Unplug the AC power cord and plug it in again, then press |
[EJECT A]. |
It will take about 10 seconds to eject the disc, while that the unit will not respond to any key commands.
30
•Set “STILL MODE” to “FIELD” in “OTHERS“ menu if pictures in the fast playback mode are blurred. (Refer to page 42.)
•Fast forward / fast reverse speed varies with disc. Approximate speed is 1(2x), 2(8x), 3(20x), 4(50x) and 5(100x) on DVD and 1(2x), 2(8x) and 3(30x) on audio CD.
•For DVD, sound will be muted during the search.
•For audio CD, sound will be intermittent during the search.
EN