Vidikron vision70 manual Correct Vision 70 input

Page 77

Maintenance and Troubleshooting

Table 5-1. Troubleshooting Chart (continued)

Symptom

Possible Cause(s)

Solution

 

 

 

Colors in the image are

• The Red/Pr, Green/Y or

• Ensure that the source

swapped; for example, reds

Blue/Pb outputs from the

outputs are connected to

appear blue or vice versa.

source are connected to the

the correct Vision 70 input.

 

wrong inputs on the Vision

 

 

70.

 

 

 

 

TEMP and LAMP LEDs are both

• The lamp cover is open.

• Close the lamp cover.

flashing red.

• Fans are not working

• Please contact your

 

properly.

Vidikron dealer for

 

 

assistance.

 

 

 

LAMP LED lights solid red.

• The lamp has failed or

• Replace the lamp with a

 

exceeded its usage life.

new one.

 

 

 

TEMP LED lights solid red.

• Vision 70 internal

• Power off the Vision 70 and

 

temperature is too high.

allow it to cool down.

 

 

Ensure that the intake and

 

 

exhaust vents are not

 

 

blocked. Turn the projector

 

 

back on. If the problem

 

 

persists, please contact

 

 

your Vidikron dealer for

 

 

assistance.

 

 

 

Vidikron Vision 70 Series Owner’s Operating Manual

65

Page 76 Page 78
Image 77
Page 76 Page 78
Contents Series 1080p DLP Projectors Page For Projectors, Video Processors and Controllers TWO Year Limited WarrantyEffective Warranty Date Vidikron Safety Precautions 1Table of Contents Operation Table of ContentsMaintenance and Troubleshooting Table of Contents 1List of Figures List of Figures Xii About This Manual 1IntroductionThey also provide supplemental information Using This ManualPerformance or cause a malfunction If you need Turn toDescription, Features and Benefits Optional Accessories Vision 70 at a Glance POWER/STANDBY LED Indicates power status as followsTemp LED Cable Access Door Open to access connectors Vision 70 Connector PanelBuilt-In Keypad Vision 70 Remote Control Vision 70 Remote ControlSource Selection Buttons Comp 1 SD Component On / OFFVID S-Video Comp 2 HD ComponentCursor Keys Memory Preset ButtonsPicture-In-Picture PIP / Picture-By-Picture PBP Controls VAC V2 Aperture ControlMotorized Lens Controls Remote Control/Built-In Keypad Functional ComparisonOperation 3InstallationRemote Control Installation Overview Quick SetupStep Procedure For Details, Refer to If installing a Vision 70/CineWide or Vision 70/CineWideProjector Installation Options Installation ConsiderationsInstallation Type Advantages ConsiderationsThrow Range Throw Ratio Throw Ratios for the Vision 70 SeriesProjector Model VisionFloor Installation Ceiling InstallationVertical and Horizontal PositionFolded Optics Installing the Optional CineWide Lens Mount With AutoScope Vision 70 with Ceiling Mount Adapters/Projector Stands AutoScope Lens Motor Installation Vision 70/CineWide with Lens Base Plate Installing the Fixed CineWide Base Plate Vision 70/CineWideMounting the Vision Adjusting the ProjectorFloor Mounting Upright Ceiling Mounting InvertedConnections to the Vision Connector Panel AccessConnecting Source 10. RGB Connections DTV or Progressive Component YPbPr Source 11. Progressive Component Video Connections12. Composite, S-Video and Component Video Connections DTV Source DVD Player, VCR Satellite Receiver Etc13. RS-232 Control System Connection ConnectionAutoScope Lens Motor Rear EquipmentPower source Turning on the PowerConnecting to AC Power Focus Zoom Vertical Lens Shift Primary lens is perfectly centered on the screen Installing and Adjusting the CineWide Anamorphic LensAnamorphic Lens Installation Adjustment Vision 70/CineWide Adjusting the Lens Height Y Anamorphic Lens Top View AutoScope AdjustmentVision 70/CineWide with 18. Attaching the Anamorphic Lens to the Lens Adapter Ring Attach Lens Mounting Assembly to Lens Motor Carriage PlateAdjusting the Horizontal X Lens Position Installation Anamorphic Lens Top View Adjusting the Geometry Installation 4Operation Using Picture-In-Picture/ Picture-By-Picture PIP/PBPSelecting Video Memory Selecting an Aspect Ratio Selecting An Input SourceUsing the On-Screen Menus Installation AdjustService PictureMain Menu Picture AdjustTypical Pluge Pattern for Adjusting Brightness Perform the adjustments in the order listed hereGray Yellow Cyan Green Magenta Red Blue Gray Yellow Cyan Green Magenta Red Blue Typical Test Pattern for Adjusting Sharpness Image Option Image OptionDescription Aspect Ratio SettingsRemote Projector Status Exit to return to the previous menu or Menu to exit InstallationService ServiceOperation Operation Remote Control ISF Calibration ISF CalibrationOperation Operation Lamp assembly for replacement 5Maintenance and TroubleshootingLamp Replacement Symptom Possible Causes Solution Troubleshooting TipsTroubleshooting Chart Correct Vision 70 input Maintenance and Troubleshooting RS-232 Connection and Port Configuration Serial Command SyntaxSerial Commands 6Serial CommunicationsSerial Communications Serial Commands Serial Commands Vision 70 Specifications 7SpecificationsIndustry-Standard Specifications Home Theater Calibration SpecificationsPower Requirements DimensionsRegulatory Approvals Limited WarrantySpecifications are subject to change without notice Vision 70 Dimensions with Optional Fixed Anamorphic Lens Vision 70 DimensionsVidikron Vision 70 Series Owner’s Operating Manual Power-cycle the projector to see the change Page Vidikron

vision70 specifications

The Vidikron Vision70 is a high-end home theater projector that has garnered attention for its exceptional performance and innovative technology. Tailored for cinephiles and enthusiasts seeking a premium viewing experience, the Vision70 combines advanced engineering with user-friendly features.

At the heart of the Vidikron Vision70 is its DLP (Digital Light Processing) technology. This approach utilizes a digital micromirror device to reflect light and create images, resulting in deep blacks, vibrant colors, and high contrast ratios. With a resolution of 1080p, the Vision70 delivers crisp imagery that captures even the finest details in your favorite films.

One of the standout features of the Vision70 is its remarkable brightness level, often reaching up to 2000 ANSI lumens. This ensures that the projector can perform well in varied lighting conditions, making it suitable for both dedicated home theaters and multipurpose media rooms. The lamp life, estimated to last around 3000 hours in eco mode, provides longevity and reliable performance for extended viewing sessions.

The Vision70 also boasts a wide color gamut, supporting multiple color spaces including standard REC 709 and cinema-grade DCI-P3. This enhancement translates to lifelike colors that resonate with the viewer, bringing content to life with remarkable accuracy. Additionally, the projector's dynamic iris technology further optimizes the contrast by adjusting light output in real-time according to scene demands.

For connectivity, the Vidikron Vision70 is equipped with multiple HDMI inputs, allowing users to connect various devices like Blu-ray players, gaming consoles, and streaming devices effortlessly. This ensures versatile use and that viewers can enjoy different content sources without hassle.

User convenience is a priority with the Vision70; the included remote control offers a seamless way to navigate through settings and features. Additionally, its compact design allows for relatively easy installation and setup in various environments.

In conclusion, the Vidikron Vision70 stands out in the crowded projector market with its combination of advanced DLP technology, impressive brightness, and exceptional color fidelity. Whether for movie nights, gaming, or sports viewing, the Vision70 promises an immersive and high-quality experience that caters to the needs of discerning audiences.
Top Page Image Contents