Vidikron Vision 30 manual RS-232C Control Codes, Code Function

RS-232 Setup

RS-232C Control Codes

NOTES:

1.All codes are in the ASCII format.

2.A carriage return is required after each command.

3.The projector will not accept RS-232 commands for 20 seconds after it is turned on or off.

Code	Function
x001x	Power On
x002x	Power Off
x003x	Menu
x004x	Enter
x005x	Exit
x006x	Up (arrow button)
x007x	Down (arrow button)
x008x	Left (arrow button)
x009x	Right (arrow button)
x011x	Show active source and
	aspect ratio information
x021x	Keypad 1
x022x	Keypad 2
x023x	Keypad 3
x024x	Keypad 4
x025x	Keypad 5
x026x	Keypad 6
x027x	Keypad 7
x028x	Keypad 8
x029x	Keypad 9
x030x	Keypad 0
x031x	Store image settings to
	Memory 1
x032x	Store image settings to
	ISF Night
x033x	Store image settings to
	ISF Day
x046x	Restore image settings from
	Memory 1
x047x	Restore image settings from
	ISF Night
x048x	Restore image settings from
	ISF Day

Code Function

x049x Load default of current source

x051x Single source, full-screen

x052x PIP - graphics on video

x053x PIP - video on graphics

x054x PBP - graphics by video

x055x PBP - video by graphics

x056x PIP - increase sub-window size

x057x PIP - decrease sub-window size

x058x Set PIP/PBP active window

x061x Anamorphic (16:9) aspect ratio

x062x Standard (4:3) aspect ratio

x063x Letterbox aspect ratio

x064x IntelliWide aspect ratio

x065x Cinema aspect ratio

x066x Cinema Fill aspect ratio

x071x RS-232 baud rate = 9600

x072x RS-232 baud rate = 38400

x073x RS-232 baud rate = 115200

x081x Image orientation = floor front

x082x Image orientation = ceiling front

x083x Image orientation = floor rear

x084x Image orientation = ceiling rear

x091x Lamp Power = 200W

x092x Lamp Power = 250W

x121x OSD Language = English

x122x OSD Language = French

x123x OSD Language = Spanish

x124x OSD Language = German

x125x OSD Language = Italian

52 Vidikron Vision Model 30 Owner’s Operating Manual