Vidikron Vision 30 manual Color Temperature

On-Screen Display Menus

The Vision Model 30 has six memory settings for Color Temperature. Four of these settings are factory set to default as follows:

0 -- Original lamp color temperature

1 -- 5400 kelvins

2 -- 6500 kelvins

3 -- 8500 kelvins

4 -- Custom

5 -- Custom



Color Temperature

Custom 4 and 5 memory are installer-adjustable and can be used to create custom settings. There are nine adjustable “white balance” parameters available for the Custom 4 and 5 settings (three each for red, green and blue). These are described later in this section; refer to “Service.”

NOTE: You must enter a passcode in order to enter the Service menu.

Choose Color Select from the Picture Adjust menu to select the color space that is appropriate for the source signal, to achieve optimal color balance.

If you select NTSC, HDTV or PAL, you can make further adjustments to individual color characteristics in the ICC Adjust sub-menu under the Service menu, described later in this section. (The Standard color select is factory-set and not adjustable.)



Color Select

Vidikron Vision Model 30 Owner’s Operating Manual 35