Vidikron Vision 12, Vision 10 manual Isf Day

Controls and Functions

1.ON / OFF

Press to turn the projector on or off.

2.IR OUTPUT INDICATOR

Lights when a button is pressed to indicate that an IR signal is being transmitted.

3.Source Selection Buttons:

VIDEO

Press to switch to the Composite video input.

COMP 1 (Component 1)

Press to switch to the Component 1 (480i/576i/720p/1080i) video input.

RGB HD

Press to switch to the RGB HD input.

S-VID 1 (S-Video)

Press to switch to the S-Video input.

COMP 2 (Component 2)

Press to switch to the Component 2 (480i/576i/720p/1080i) video input.

DVI

Press to switch to the Digital Video (HDMI) input.

4.Aspect Ratio Selection Buttons:

ANA (Anamorphic)

For viewing 16:9 DVDs or HDTV programs in their native aspect ratio.

4X3 (Standard 4:3)

Scales the input signal to fit 4:3 display mode in the center of the screen.

L-BOX (Letterbox)

For viewing LaserDisc movies or non-anamorphic DVDs on a 4:3 screen.

I-WIDE (IntelliWide)

Enlarges a 4:3 image horizontally in a NON-linear fashion to fit 16:9 full screen display.

CINEMA

For viewing 2.35:1 source material on a 1.78:1 (16:9) screen. The upper and lower portions are masked.

C-FILL (CinemaFill)

Stretches a 2.35 image vertically in both directions to fill a 16:9 screen.

5.DEF

Press to restore factory-default settings for the current source.

6.ISF DAY

Press to recall settings for the current input from the “ISF Day” memory preset.

7.ENTER

Press to select a highlighted menu item or confirm a changed setting.

8.MENU

Press this button to access the on-screen display (OSD) controls.

10 Vidikron Vision Model 10/Model 12 Owner’s Operating Manual