Video settings | TANDBERG TC3.0 instruction

TANDBERG Codec C90 and Profiles using C90

Administrator guide

ContentsContents

IntroductionIntroduction

AdvancedAdvancedAdvancedconfigurationconfigurationconfig.

PassPasswordord protectionprotection

AboutAboutmonitorsonitors

AudioAudiomattersat ers

AppendicesAppendices

ContactContactusus

The Video settings, cont...

Video Input Source [1..5] CameraControl Mode

Determines whether or not the camera control should be enabled for the selected video input source.

Valuespace: <On/Off>

On: Set to On to enable camera control for the camera connected to the selected video input connector.

Off: Set to Off to disable camera control for the camera connected to the selected video input connector.

Example: Video Input Source 1 CameraControl Mode: On

Video Input Source [1] Connector

Select which video input connector to be active on connector group 1. The available options for Source 1 are listed below.

Valuespace: <HDMI/HDSDI/YPbPr>

HDMI: Select HDMI when you want to use the HDMI 1 connector as input.

HDSDI: Select HD-SDI when you want to use the HD-SDI 1 connector as input.

YPbPr: Select YPbPr when you want to use the Y-Pb-Pr (Component) 1 connectors as input.

Example: Video Input Source 1 Connector: HDMI

The Video settings, cont...

Video Input Source [4] Connector

Select which video input connector to be active on connector group 4. The available options for Source 4 are listed below.

Valuespace: <HDMI/HDSDI>

HDMI: Select HDMI when you want to use the HDMI 4 connector as input.

HDSDI: Select HD-SDI when you want to use the HD-SDI 4 connector as input.

Example: Video Input Source 4 Connector: HDMI

Video Input Source [5] Connector

Select which video input connector to be active on connector group 5. The available options for Source 5 are listed below.

Valuespace: <YC/Composite/DVI>

DVI: Select DVI-I when you want to use the DVI-I 5 connector as input.

YC: Select YC when you want to use the S-Video (YC) input. Connect the S-Video input to the connector marked as Y/Comp and C.

Composite: Select Comp when you want to use the Composite input. Connect the Composite input to the connector marked as Y/Comp.

Example: Video Input Source 5 Connector: DVI

Video Input Source [2] Connector

Select which video input connector to be active on connector group 2. The available options for Source 2 are listed below.

Valuespace: <HDMI/HDSDI/YPbPr>

HDMI: Select HDMI when you want to use the HDMI 2 connector as input.

HDSDI: Select HD-SDI when you want to use the HD-SDI 2 connector as input.

YPbPr: Select YPbPr when you want to use the Y-Pb-Pr (Component) 2 connectors as input.

Example: Video Input Source 2 Connector: HDMI

Video Input Source [1..5] Name

Customizable name of the connector group. Enter the name of the video input source 1-5.

Valuespace: <S: 0, 50>

Format: String with a maximum of 50 characters.

Example: Video Input Source 1 Name: “”

Video Input Source [3] Connector

Select which video input connector to be active on connector group 3. The available options for Source 3 are listed below.

Valuespace: <HDMI/HDSDI/DVI>

DVI: Select DVI-I when you want to use the DVI-I 3 connector as input.

HDMI: Select HDMI when you want to use the HDMI 3 connector as input.

HDSDI: Select HD-SDI when you want to use the HD-SDI 3 connector as input.

Example: Video Input Source 3 Connector: DVI

D14635.02—MARCH 2010