Phonebook settings | TANDBERG TC3.0 manual

TANDBERG Codec C90 and Profiles using C90

Administrator guide

ContentsContents

IntroductionIntroduction

AdvancedAdvancedAdvancedconfigurationconfigurationconfig.

PassPasswordord protectionprotection

AboutAboutmonitorsonitors

AudioAudiomattersat ers

AppendicesAppendices

ContactContactusus

The NetworkServices settings, cont...

NetworkServices SNMP Host [1..3] Address

Enter the address of up to three SNMP Managers. All traps will then be sent to the hosts listed.

The system’s SNMP Agent (in the codec) responds to requests from SNMP Managers (a PC program etc.). SNMP Traps are generated by the SNMP Agent to inform the SNMP Manager about important events. Can be used to send event created messages to the SNMP agent about different events like: system reboot, system dialing, system disconnecting, MCU call, packet loss etc. Traps can be sent to multiple SNMP Trap Hosts.

Valuespace: <S: 0, 64>

Format: String with a maximum of 64 characters.

Example: NetworkServices SNMP Host 1 Address: “”

The NetworkServices settings, cont...

NetworkServices Telnet Mode

Telnet is a network protocol used on the Internet or local area network (LAN) connections.

Valuespace: <On/Off>

On: The Telnet protocol is enabled.

Off: The Telnet protocol is disabled. This is the default factory setting.

Example: NetworkServices Telnet Mode: Off

NetworkServices SNMP Mode

SNMP (Simple Network Management Protocol) is used in network management systems to monitor network-attached devices (routers, servers, switches, projectors, etc) for conditions that warrant administrative attention. SNMP exposes management data in the form of variables on the managed systems, which describe the system configuration. These variables can then be queried (set to ReadOnly) and sometimes set (set to ReadWrite) by managing applications.

Valuespace: <Off/ReadOnly/ReadWrite>

Off: Set to Off when you want to disable the SNMP network service.

ReadOnly: Set to ReadOnly when you want to enable the SNMP network service for queries only.

ReadWrite: Set to ReadOnly when you want to enable the SNMP network service for both queries and commands.

Example: NetworkServices SNMP Mode: ReadWrite

NetworkServices SNMP SystemContact

Enter the name of the Network Services SNMP System Contact.

Valuespace: <S: 0, 50>

Format: String with a maximum of 50 characters.

Example: NetworkServices SNMP SystemContact: “”

The Phonebook settings

Phonebook Server [1..5] ID

Enter a name for the external phonebook.

Valuespace: <S: 0, 64>

Format: String with a maximum of 64 characters.

Example: Phonebook Server 1 ID: “”

Phonebook Server [1..5] URL

Enter the address (URL) to the external phonebook server.

Valuespace: <S: 0, 255>

Format: String with a maximum of 255 characters.

Example: Phonebook Server 1 URL: “http://tms.company.com/tms/public/external/ phonebook/phonebook.asmx”

NetworkServices SNMP SystemLocation

Enter the name of the Network Services SNMP System Location.

Valuespace: <S: 0, 50>

Format: String with a maximum of 50 characters.

Example: NetworkServices SNMP SystemLocation: “”

D14635.02—MARCH 2010