Audio Output Line 1. Level, Audio Volume

TANDBERG Codec C90 and Profiles using C90

Administrator guide

ContentsContents

IntroductionIntroduction

AdvancedAdvancedAdvancedconfigurationconfigurationconfig.

PassPasswordord protectionprotection

AboutAboutmonitorsonitors

AudioAudiomattersat ers

AppendicesAppendices

ContactContactusus

The Audio settings, cont...

Audio Output Line [1..6] Level

Defines the output level of the selected Audio Output Line connector in steps of 1dB from -24dB to 0dB.

See the Audio Level tables in the Physical Interfaces Guide for the codec for a complete overview of the menu values represented indB.

Valuespace: <-24..0>

Range: -24 to 0dB

Example: Audio Output Line 1 Level: -10

Audio Output Line [1..6] Mode

Determines whether or not the selected Audio Line output connector is enabled.

Valuespace: <On/Off>

On: Set to On to enable the Audio Line output.

Off: Set to Off to disable the Audio Line output.

Example: Audio Output Line 1 Mode: On

Audio Output Line [1, 3] Type

Determines if the selected Audio Line output connector is an analog or digital type output.

Valuespace: <Auto/SPDIF>

Auto: If a TANDBERG Digital NAM is detected then SPDIF mode will be selected, otherwise analog mode will be selected.

SPDIF: Set to SPDIF when you want the Audio Line 1 or 3 output to be in digital mode.

Example: Audio Output Line 1 Type: Auto

The Audio settings, cont...

Audio SoundsAndAlerts RingTone

Selects the ring tone for incoming calls.

Valuespace: <Marbles/IceCrystals/Polaris/Alert/Discrete/Fantasy/Jazz/Nordic/Echo/Rhythmic> Range: Select a tone from the list of ring tones.

Example: Audio SoundsAndAlerts RingTone: Jazz

Audio SoundsAndAlerts RingVolume

Sets the ring tone volume[0-100] for an incoming call in steps of 0.5dB from -34.5dB to 15dB.

Valuespace: <0..100>

Range: Select a value from 0 to 100. Volume 0 = Off.

Example: Audio SoundsAndAlerts RingVolume: 50

Audio Volume

Sets the volume level [0-100] on the loudspeaker output in steps of 0.5dB from -34.5dB to 15dB.

Valuespace: <0..100>

Range: Select a value from 0 to 100. Volume 0 = Off.

Example: Audio Volume: 70

Audio Output Line [2, 4, 5, 6] Type

Line output 2, 4, 5, 6 are dedicated analog outputs, hence type can be set to analog only.

Valuespace: <Analog>

Can be set to analog only.

Example: Audio Output Line 2 Type: Analog

Audio SoundsAndAlerts KeyTones Mode

The system can produce a sound every time a key on the remote control is pressed.

Valuespace: <On/Off>

On: There will be a sound indicator when pressing keys on the remote control.

Off: The remote control Key Tones is switched off.

Example: Audio SoundsAndAlerts KeyTones Mode: Off

D14635.02—MARCH 2010