Runco VX-2IX manual Select Cinema to view

Operation

Table 4-1. Aspect Ratio Settings (continued)

	Remote
Aspect Ratio	Control		Description
	Key
Cinema	CINEMA			Select Cinema to view 2.35
				source material in its native
				aspect ratio.
				With a 16:9 screen and a
				non-CineWide projector (no
		2.35:1 Image on		anamorphic lens), the upper and
		16:9 Screen
				lower portions of the screen are
		(without CineWide)
				masked, but the geometry of the
				active image area is unchanged.
				With a 2.35:1 screen and a
		2.35:1 Image on		CineWide-equipped projector,
				the VX-2ix vertically stretches
		2.35:1 Screen
		(with CineWide)		the 2.35 image so that the active
				image area fills the 16:9 chip
				surface, eliminating the black
				bars. The secondary
				anamorphic lens then stretches
				the image back to 2.35:1.
Virtualwide 2.35	SVC			A 16:9 image is scaled
				NON-linearly (more on the sides
		16:9 IImage on		than in the center) to fit a 2.35:1
		22..35:1 Screen		screen.
				Virtualwide 2.35 is available only
				on CineWide-equipped VX-2ix
				projectors.
		16:9 Image on
		2.35:1 Screen with
		VirtualWide 2.35

32 Runco VX-2ix Owner’s Operating Manual