VX-2ix Color Gamut Adjustment
9.Type gamut green and press <Enter>. The
10.Repeat Step 2.
11.In HyperTerminal, use the gamut set green command to change the x and y coordinates to the values you obtained in Step 10.
12.To confirm the change, repeat Step 9. The displayed x and y values should match what you just entered.
13.Type gamut blue and press <Enter>. The
14.Repeat Step 2.
15.In HyperTerminal, use the gamut set blue command to change the x and y coordinates to the values you obtained in Step 14.
16.To confirm the change, repeat Step 13. The displayed x and y values should match what you just entered.
17.Type gamut off and press <Enter>. The
When you have completed the gamut adjustments, proceed with the Display Color adjustments; refer to Calibration on page 38.
Runco |