Runco VX-2IX manual Picture Brightness Contrast Color Tint Sharpness

Operation

Use the controls in the Picture Menu to calibrate your VX-2ix for optimum picture quality.

The VX-2ix has been designed to incorporate setup and calibration standards established by the Imaging Science Foundation (ISF). The ISF has developed carefully crafted, industry-recognized standards for optimal video performance and has implemented a training program for technicians and installers to use these standards to obtain optimal picture quality from Runco video display devices. Accordingly, Runco recommends that setup and calibration be performed by an ISF certified installation technician.

All signal types require separate processing. Therefore, you need to calibrate each input separately.

When you change a picture quality setting, save the change to a

Note preset afterwards. Otherwise, the change will be lost when a different input is selected. (Picture quality settings are saved for

each input separately.) For information about saving settings, refer to ISF Presets on page 37.

Although it may be possible to obtain satisfactory picture quality using the naked eye and regular program material, Runco recommends using the following calibration tools for best results:

•External test pattern source – Ovation Multimedia, Digital Video Essentials or AVIA test DVD or equivalent.

•A blue filter (provided with many test DVDs), for color level and tint adjustments.

Connect your test pattern source to the input that you are calibrating and proceed as follows. Perform the adjustments in the order listed here.

Brightness: On your external test pattern source, select a PLUGE pattern. (PLUGE is an acronym for “Picture Line-Up Generation Equipment.”) Figure 4-2shows a typical PLUGE pattern.

Below Black

Above Black

Figure 4-2. Typical PLUGE Pattern for Adjusting Brightness

Picture

Picture

Brightness

Contrast

Color

Tint

Sharpness

Runco VX-2ix Owner’s Operating Manual 33