Runco CR-26HD, CR-32HDi manual Introduction, About This Manual

1. Introduction

This Owner’s Manual describes how to install, set up and operate the Runco CR-26HD	1.1
and CR-32HDi LCD Displays. Throughout this manual, the Runco CR-26HD and	About This Manual
CR-32HDi LCD Displays are referred to simply as the “Crystal Series LCD Display.”
Runco has prepared this manual to help home theater installers and end users get the	Target Audience
most out of the Crystal Series LCD Display.
Runco has made every effort to ensure that this manual is accurate as of the date it was
printed. However, because of ongoing product improvements and customer feedback, it
may require updating from time to time. You can always find the latest version of this and
other Runco product manuals on-line, at www.runco.com.
Runco welcomes your comments about this manual. Send them to techpub@runco.com.	If You Have Comments
	About This Manual...
Text Conventions: The following conventions are used in this manual, in order to clarify	Textual and Graphic
the information and instructions provided:	Conventions
• Remote control button identifiers are set in upper-case bold type; for example, “Press
EXIT to return to the previous menu.”
• Computer input (commands you type) and output (responses that appear on-screen) is
shown in monospace (fixed-width) type; for example: “To change the aspect ratio to
Letterbox, type [S4E0002.”
• All keys with functional names are initial-capped, set in bold type and enclosed in angle
brackets. These keys are the following: <Enter>, <Spacebar>, <Control>, <Esc>
and <Tab>.
• <Enter> indicates that you may press either the RETURN or ENTER key on your
computer keyboard if it has both keys.
In addition to these conventions, underlining, boldface and/or italics are occasionally used
to highlight important information, as in this example:

A carriage return must be used after each command or string.

Note

Runco CR-26HD/CR-32HDi Owner’s Operating Manual 1