Sanyo TLS-9960 Heads Switching Function, Switching heads combination and azimuth display

Page 42

HEADS SWITCHING FUNCTION

This unit is equipped with 4 double azimuth heads. Under normal conditions, recording and playback is done using the main heads “A1” and “B1”.

B2 (secondary)

A1 (main)

B1 (main)

A2 (secondary)

If case of problem with the main heads, for example if only one channel is being recorded and playback cannot be done, you can temporarily switch to the secondary heads so that the playback picture can be viewed.

(In case of problem with the main heads, it is recommended to have the unit repaired as soon as possible.)

Switching heads combination and azimuth display

The heads that are used can be switched to any of the combinations (1, 2 or 3) indicated in the table below, until the playback picture can be viewed. When switching to a combination other than the main heads, the corresponding azimuth indicator will be displayed.

1Start playback.

Azimuth indicator

SC

NOTES:

œWhen the end of the tape is reached, the heads combination automatically returns to the normal setting. The heads combination will also automatically return to the normal setting when the tape is stopped, the cassette is ejected or after a power interruption.

œWhen using the heads combination 1 or 2 during playback, note the following points.

2-hour mode

Satisfactory image quality (may require tracking control adjustment)

12 or 24-hour mode

Noise bars will be visible

48 - 960-hour mode

Noise bars will appear and disappear

Frame advance

Noise bars will appear and disappear

2Press and hold the MENU button, then press the SHIFT « button.

3Release the MENU button.

œThe selected heads combination will change in the order indicated in the table below.

To select another heads combination, repeat steps 2 and 3 above.

1234

 

Heads

Azimuth indicator

 

combination

(Displayed on the digital panel)

1

A1 and A2

+

 

 

 

2

B1 and B2

–

 

 

 

3

A2 and B2

SC

 

 

 

4

A1 and B1

No indicator

(Normal heads combination)

 

 

English

41

Page 41 Page 43
Image 42
Page 41 Page 43
Contents TLS-9960 Precautions Features AccessoryContents Front Panel Operation Mode Indicator Locations of Controls and IndicatorsOperation Indicators OFF indicatorBack Panel RS485 BPower Cord Installation About the memory resetConnections Types of ON-SCREEN Displays and Display Sequence Reference pages are shown in square bracketsJOG dial Using the JOG dial and Shuttle ringTypes of ON-SCREEN Displays and Display Sequence Shuttle ringDay of week is set automatically Setting the Language and ClockSetting procedure is now completed Last 2 digits only are displayedChanging the Date/Time Display Position Changing the ON-SCREEN DisplaySelecting the On-screen Display Date and time are displayedVideo Cassette Tapes Correct tape thread check function Setting the Action to Take When a Cassette is LoadedVideo Cassette Tapes @@TIMING@@@@@@@@FIELDIf no tape management data is present on the tape Tape Management FunctionOperation If tape management data is present on the tapeTape Management Function Setting the Tape Management FunctionTape MANAGE. setting is flashing @@@@TAPE@MANAGEMENTTape Management Conflict Display Conflict display sample@@@@@@PRESS@EJECT Normal Recording Recording Speed ModePause/Still indicator N blinks Normal Recording Before startingNormal Recording Changes to the Recording Speed Mode During RecordingAction to Take when the Video Signal Deteriorates Concerning the Number of Times Tapes can be Rerecorded onRecording Check Clog DetectionAutorepeat Recording Setting the Mode at the End of the TapeRepeat indicator will light Autorepeat RecordingAlarm Recording Alarm Recording SettingConnections to the Alarm IN/OUT Terminals Alarm RecordingAlarm Recording Counter Display Alarm Reset in terminalAlarm Search Alarm ScanProgram Timer Recording Recording will not take placeProgram Timer Recording Day of the week of the 8th line is flashingTo Cancel a Program Timer Recording Setting the HolidaysChanging a Program Timer Recording To Cancel all Program Timer RecordingsThese portions will not be recorded Recording Using AN External Timer Input Series Recording Series Recording SetupRepeat REC switch Series recording connectionsContinous Loop Recording Setup Series RecordingLoop recording connection example with 2 VCRs Single Image Recording Setup Alarm trigger while in single image recording modeSingle Image Recording Normal Playback Special Playback Shuttle Ring Operation Special PlaybackDay/Time Search D Search 01 0000 will be displayed on screenTape Counter Setting the Security LockCounter will be reset to 0H 00M 00S Is displayed on the digital displaySetting the Buzzer Clock AdjustmentSetting procedure on the first VCR is now completed Setting the RS-232C or RS-485 Data Transfer Speed DIP Switches SetupData Transfer Speed Setup Connector a Connector B Signal Setting the RS-232C or RS-485 Data Transfer SpeedRS485 RJ-11 connector layout RS-485 ConnectionOutput Terminals Timer OUT TerminalTape END OUT Terminal Output Setting Tape END OUT TerminalField or Frame setting is flashing Series OUT/NON REC OUT terminal settingSW OUT Terminal Output Setting Output TerminalsRemote control setting Remote JackHeads Switching Function Switching heads combination and azimuth displayMaintenance Maintenance Maintenance TableMaintaining and Checking The Mechanism Troubleshooting Guide After a Power FailureSystem Down Specifications Sanyo Industrial VCR Warranty Weekdays 830 AM 500 PM Pacific TimeRC4Q/U

TLS-9960 specifications

The Sanyo TLS-9960 is a remarkable addition to the world of consumer electronics, particularly known for its advanced features and user-friendly interface. Designed with the modern consumer in mind, this product combines high performance, innovative technologies, and aesthetic appeal, making it a sought-after device for various applications.

One of the standout features of the Sanyo TLS-9960 is its high-resolution display. With a vibrant and sharp screen, users can enjoy clear visuals whether they are watching movies, playing games, or browsing the internet. The screen is designed to minimize glare and enhance color accuracy, providing a rich viewing experience that is enjoyable for extended periods.

The TLS-9960 is powered by advanced processing technology, ensuring smooth operation even when multitasking. Equipped with a high-performance processor, this device is capable of handling various applications simultaneously without any noticeable lag. This feature is particularly beneficial for users who often switch between work and entertainment, making it a versatile choice for both the office and home environments.

In terms of connectivity, the Sanyo TLS-9960 supports a wide range of options, including Bluetooth and Wi-Fi capabilities. This enables seamless integration with other devices and allows users to stream content, transfer files, and connect to the internet effortlessly. Its user-friendly interface makes navigating through settings and options a breeze, ensuring that even those who are not tech-savvy can maximize its potential.

Durability is another characteristic that sets the TLS-9960 apart from its competitors. Constructed with high-quality materials, the device is designed to withstand everyday wear and tear. This durability factor is complemented by a sleek design that not only enhances its aesthetic appeal but also ensures portability, making it easy to carry from one location to another.

Battery life is often a critical consideration for users, and the Sanyo TLS-9960 does not disappoint. It boasts an impressive battery performance, allowing users to enjoy extended hours of use on a single charge. This feature makes it an ideal companion for travel or long work sessions away from a power source.

Overall, the Sanyo TLS-9960 combines cutting-edge technology, robust features, and an attractive design, making it a versatile and reliable choice for consumers. Whether for personal, professional, or entertainment purposes, the TLS-9960 stands out as a quality device that meets the needs of today's users.
Top Page Image Contents