Sanyo TLS-9960 instruction manual Troubleshooting Guide, After a Power Failure, System Down

Page 45

TROUBLESHOOTING GUIDE

If the unit does not operate normally when you follow the instructions indicated in the manual, please refer to the table below.

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

No power

The power cord is not connected

Connect the power cord

No image displayed on

The connections are not correct

Check that all connections are correct

the monitor TV

The power to the camera and/or monitor TV

Turn all connected devices power on

 

is not turned on

 

The buttons do not

A cassette tape is not loaded

Load a cassette and turn the power on

respond

All functions are suspended due to

Wait for the “À” indicator to go off

 

condensation

 

 

Alarm recording

Wait for the alarm recording to end

 

The security lock is engaged

Cancel the security lock

 

 

 

Recording is not

The loaded cassette has no

Load a cassette tape with

possible (the tape is

erasure-prevention tab

erasure-prevention tab or cover the tab hole

ejected)

 

with adhesive tape

 

 

 

Autorepeat recording is

“AL” is displayed on the digital display

Display (ALARM TIME) menu, then press

not possible

 

the MENU RESET button to turn off the “AL”

 

 

indicator

Timer recording is not

The date and time are not set correctly

Set the date and time correctly

possible

The unit is not set to timer recording

Press the TIMER button to display “n” on

 

stand-by mode

the digital display

 

“N” is selected for the timer recordings

Be sure to select “Y” for the programmed

 

 

timer recordings

Alarm recording is not

“OFF” is displayed on the digital display

Press the EJECT, STOP or PLAY button or

possible

 

turn the SHUTTLE ring to turn the indicator

 

 

off

Noise in the playback

The video heads need cleaning

Clean the video heads

picture

 

 

The date and time are

The ON SCREEN switch is set to the “OFF”

Set the ON SCREEN switch to the “ON”

not recorded

position

position

The cassette tape

Problem with the system

Unplug the power cord then plug it back in

cannot be ejected

 

 

The cassette is ejected

The tape is not threaded correctly

Try inserting the cassette one more time or

a few seconds after it

 

using a new cassette. If it is ejected again,

has been inserted

 

please consult your dealer.

 

 

 

After a Power Failure

If after a power failure the recording speed is reset to 2-hour mode, it is due to insufficient backup battery charge. This is not a malfunction.

System Down

If the unit does not function at all, try the following.

1Unplug the power cord then plug it back in.

2Reset the memory. (Press the ALL RESET button. Under normal conditions, do not touch the ALL RESET button.)

3If the problem is not corrected after performing steps 1 and 2 a few times, consult your dealer.

44

English

Page 44 Page 46
Image 45
Page 44 Page 46
Contents TLS-9960 Precautions Features AccessoryContents Front Panel Operation Indicators Locations of Controls and IndicatorsOperation Mode Indicator OFF indicatorRS485 B Back PanelPower Cord Installation About the memory resetConnections Reference pages are shown in square brackets Types of ON-SCREEN Displays and Display SequenceTypes of ON-SCREEN Displays and Display Sequence Using the JOG dial and Shuttle ringJOG dial Shuttle ringSetting procedure is now completed Setting the Language and ClockDay of week is set automatically Last 2 digits only are displayedSelecting the On-screen Display Changing the ON-SCREEN DisplayChanging the Date/Time Display Position Date and time are displayedVideo Cassette Tapes Video Cassette Tapes Setting the Action to Take When a Cassette is LoadedCorrect tape thread check function @@TIMING@@@@@@@@FIELDOperation Tape Management FunctionIf no tape management data is present on the tape If tape management data is present on the tapeTape MANAGE. setting is flashing Setting the Tape Management FunctionTape Management Function @@@@TAPE@MANAGEMENTTape Management Conflict Display Conflict display sample@@@@@@PRESS@EJECT Pause/Still indicator N blinks Recording Speed ModeNormal Recording Normal Recording Before startingAction to Take when the Video Signal Deteriorates Changes to the Recording Speed Mode During RecordingNormal Recording Concerning the Number of Times Tapes can be Rerecorded onClog Detection Recording CheckRepeat indicator will light Setting the Mode at the End of the TapeAutorepeat Recording Autorepeat RecordingAlarm Recording Setting Alarm RecordingAlarm Recording Counter Display Alarm RecordingConnections to the Alarm IN/OUT Terminals Alarm Reset in terminalAlarm Scan Alarm SearchRecording will not take place Program Timer RecordingDay of the week of the 8th line is flashing Program Timer RecordingChanging a Program Timer Recording Setting the HolidaysTo Cancel a Program Timer Recording To Cancel all Program Timer RecordingsThese portions will not be recorded Recording Using AN External Timer Input Repeat REC switch Series Recording SetupSeries Recording Series recording connectionsContinous Loop Recording Setup Series RecordingLoop recording connection example with 2 VCRs Single Image Recording Setup Alarm trigger while in single image recording modeSingle Image Recording Normal Playback Special Playback Day/Time Search Special PlaybackShuttle Ring Operation D Search 01 0000 will be displayed on screenCounter will be reset to 0H 00M 00S Setting the Security LockTape Counter Is displayed on the digital displaySetting the Buzzer Clock AdjustmentSetting procedure on the first VCR is now completed Setting the RS-232C or RS-485 Data Transfer Speed DIP Switches SetupData Transfer Speed Setup RS485 RJ-11 connector layout Setting the RS-232C or RS-485 Data Transfer SpeedConnector a Connector B Signal RS-485 ConnectionTape END OUT Terminal Output Setting Timer OUT TerminalOutput Terminals Tape END OUT TerminalSW OUT Terminal Output Setting Series OUT/NON REC OUT terminal settingField or Frame setting is flashing Output TerminalsRemote Jack Remote control settingSwitching heads combination and azimuth display Heads Switching FunctionMaintenance Maintenance Maintenance TableMaintaining and Checking The Mechanism Troubleshooting Guide After a Power FailureSystem Down Specifications Weekdays 830 AM 500 PM Pacific Time Sanyo Industrial VCR WarrantyRC4Q/U

TLS-9960 specifications

The Sanyo TLS-9960 is a remarkable addition to the world of consumer electronics, particularly known for its advanced features and user-friendly interface. Designed with the modern consumer in mind, this product combines high performance, innovative technologies, and aesthetic appeal, making it a sought-after device for various applications.

One of the standout features of the Sanyo TLS-9960 is its high-resolution display. With a vibrant and sharp screen, users can enjoy clear visuals whether they are watching movies, playing games, or browsing the internet. The screen is designed to minimize glare and enhance color accuracy, providing a rich viewing experience that is enjoyable for extended periods.

The TLS-9960 is powered by advanced processing technology, ensuring smooth operation even when multitasking. Equipped with a high-performance processor, this device is capable of handling various applications simultaneously without any noticeable lag. This feature is particularly beneficial for users who often switch between work and entertainment, making it a versatile choice for both the office and home environments.

In terms of connectivity, the Sanyo TLS-9960 supports a wide range of options, including Bluetooth and Wi-Fi capabilities. This enables seamless integration with other devices and allows users to stream content, transfer files, and connect to the internet effortlessly. Its user-friendly interface makes navigating through settings and options a breeze, ensuring that even those who are not tech-savvy can maximize its potential.

Durability is another characteristic that sets the TLS-9960 apart from its competitors. Constructed with high-quality materials, the device is designed to withstand everyday wear and tear. This durability factor is complemented by a sleek design that not only enhances its aesthetic appeal but also ensures portability, making it easy to carry from one location to another.

Battery life is often a critical consideration for users, and the Sanyo TLS-9960 does not disappoint. It boasts an impressive battery performance, allowing users to enjoy extended hours of use on a single charge. This feature makes it an ideal companion for travel or long work sessions away from a power source.

Overall, the Sanyo TLS-9960 combines cutting-edge technology, robust features, and an attractive design, making it a versatile and reliable choice for consumers. Whether for personal, professional, or entertainment purposes, the TLS-9960 stands out as a quality device that meets the needs of today's users.
Top Page Image Contents