Sanyo SCP-2700 Connections Optional, Preferred TV Connections, Digital Multi-channel sound

Page 13

Connections (Continued)

Optional, Preferred TV Connections (Continued)

Rear of DVD+VCR

Note

You can ONLY listen to DVD playback using COAXIAL

(X)and AUDIO OUT (A2) connections. The tuner and VCR will still be heard through the RF.OUT (R) or DVD/VCR AUDIO OUT (A1) jacks. (See page 12.)

Connecting to an amplifier equipped with two channel analog stereo or Dolby Surround

Connect the Left and Right AUDIO OUT (or DVD/VCR AUDIO OUT) jacks on the DVD+VCR to the audio left and right in jacks on your amplifier, receiver, or stereo system using the audio cables (A1, A2) supplied.

A1A2

PREPARATION

X

Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/Video receiver equipped with a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS)

1

Connect one of the DVD+VCR’s DIGITAL AUDIO

OUT jacks (COAXIAL X) to the corresponding in

jack on your amplifier. Use an optional digital (coaxial X) audio cable.

2 You will need to activate the DVD+VCR’s digital output. (See “AUDIO” on page 19).

Digital Multi-channel sound

A digital multi-channel connection provides the best sound quality. For this you need a multi-channel Audio/Video receiver that supports one or more of the audio formats supported by your DVD+VCR (MPEG 2, Dolby Digital and DTS). Check the receiver manual and the logos on the front of the receiver.

Caution:

Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected.

Notes

If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.

Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder.

To see the audio format of the current DVD in the on-screen display, press AUDIO.

L

R

COAXIAL

AUDIO INPUT

DIGITAL INPUT

Amplifier (Receiver)

Accessory Audio/Video (A/V) Connections to

DVD+VCR

Connect the VCR IN LINE 1 or AV INPUT jacks on the DVD+VCR to the audio/video out jacks on your accessory component, using the optional audio/video cables.

Accessory Component:

VCR, Camcorder,

Video Camera,

Satellite Receiver,

Laser Disc Player

Jack panel of Accessory

AUDIO

OUTPUT

R

L

VIDEO

OUTPUT

OR

Rear of DVD+VCR

Front of DVD+VCR

13

Image 13
Contents DVC-2700 Regulatory Information FCC Part Safety PrecautionsImportant Safety Instructions Table of Contents Remote Control Operation Range Remote control battery installationBefore Use Playable DiscsAbout Symbols PrecautionsSetting the Output Source Front Panel REC Display WindowRemote Control Rear Panel Connections Connecting Antenna/Cable TV toOptional, Preferred TV Connections Connections Basic TV ConnectionsRF coaxial connection Audio/Video connectionConnections Optional, Preferred TV Connections Accessory Audio/Video A/V Connections toDigital Multi-channel sound Before Operation VCR Part On-Screen Display OSD Setting the On-Screen DisplayMenu Selection Channel Selection Before Operation VCR Part Setting the VCR Setup MenuAuto Clock Set Before Operation VCR Part Setting the ClockManual Clock Set Press v/ V to choose the Clock menuGeneral Explanation Before Operation DVD PartOn-Screen Display On-screen display operationInitial Settings General Operation Before Operation DVD Part Initial SettingsSample Freq. Frequency Dolby DigitalDynamic Range Control DRC VocalChanging the 4-digit password Password DVD Setting your passwordIf you forget your 4-digit password Rating DVDSpecial Effect Playbacks Operation with tape Normal PlaybackOperation with tape Normal Recording Timer RecordingTo pause the recording To record one TV program while watching anotherOperation with tape Checking Erasing the Timer ProgramProgram Priority Checking the Recording Time Instant Timer RecordingTo extend the Recording Time Dubbing and EditingVHS Hi-Fi Stereo System MTS Broadcast Multichannel TV Sound Indicator MTSPlayback with Hi-Fi Stereo Audio Sound MTS Multi-Channel TV SoundAdditional Information Operation with tape Tape Counter Memory FeatureOperation with DVD Playing DVD General FeaturesMoving to another Title Moving to another ChapterOperation with DVD General Features Special DVD Features To stop playback at any other time, press Stop About MP3Operation with Audio CD and MP3 Discs Programmed Playback with Audio CD and MP3 Discs Programmed Playback CD MP3Erasing a Track from Program List Erasing the Complete Program ListSymptom Cause Correction TroubleshootingSecurely Moisture Condensation DVD+VCR is in Timer modeLanguage Code Language Code ListCountry Code Country Code ListVCR Specifications SpecificationsDVD Specifications General
Related manuals
Manual 138 pages 8.38 Kb