
Troubleshooting (Continued)
| Symptom | Cause | Correction | ||
| 
 | 
 | 
 | 
 | |
| Some channels are | Those channels were deleted with the | Use CH. ADD/DEL. to restore channels. | ||
| skipped over when | CH. ADD/DEL option. | See “Channel Selection” on page 15. | ||
| using CH/TRK (v/V) | 
 | 
 | 
 | |
| 
 | 
 | 
 | 
 | |
| Picture and sound of | Antenna or cables are loose. | Tighten connections or replace cable. | ||
| broadcasting channel | 
 | 
 | 
 | |
| are weak or missing. | 
 | 
 | 
 | |
| Wrong TUNING BAND option is being | Try all TUNING BAND options. See | |||
| 
 | ||||
| 
 | used. | “Channel Selection” on page 15 for | ||
| 
 | 
 | details. | ||
| 
 | 
 | 
 | 
 | |
| Camcorder image is not | Camcorder is off. | Turn camcorder on and operate | ||
| shown. | 
 | properly. | ||
| 
 | 
 | 
 | 
 | |
| Camcorder image via | DVD+VCR SOURCE SELECT is not set | Press INPUT to select LINE input chan- | ||
| A/V input to DVD+VCR | to LINE1 or LINE2. | nel (LINE1 or LINE2). | ||
| is not shown on TV | 
 | 
 | 
 | |
| screen. | 
 | 
 | 
 | |
| Timer recording is not | Clock in DVD+VCR is not set to correct | Set clock to correct time. See “Setting | ||
| possible. | time. | the Clock” on page 16. | ||
| 
 | 
 | 
 | ||
| 
 | Timer has been programmed | Reprogram Timer. See “Timer | ||
| 
 | incorrectly. | Recording” on pages 22 and 23. | ||
| 
 | indicator does not appear after pro- | Reprogram Timer. | ||
| 
 | gramming timer. | 
 | 
 | |
| indicator appears | DVD+VCR is in Timer Recording mode. | This is the normal indication that the | ||
| after DVD+VCR is turned | 
 | DVD+VCR is in TIMER mode. | ||
| off. | 
 | 
 | 
 | |
| Stereo Audio Record | TV is not  | No action is possible. | ||
| 
 | 
 | 
 | ||
| Broadcast program is not in stereo for- | No action is possible. | |||
| and/or Playback is not | ||||
| mat. | 
 | 
 | ||
| present. | 
 | 
 | ||
| 
 | 
 | 
 | ||
| DVD+VCR A/V Out jacks are not con- | Make A/V connections. Stereo is | |||
| 
 | ||||
| 
 | nected to TV A/V In jacks. | available only via A/V output from | ||
| 
 | 
 | DVD+VCR. | ||
| 
 | 
 | 
 | ||
| 
 | DVD+VCR Audio/Video Out is not | Select AUX or A/V source as TV input. | ||
| 
 | selected for viewing at the TV. | 
 | 
 | |
| 
 | DVD+VCR BROADCAST TYPE mode is | Set BROADCAST TYPE mode to | ||
| 
 | set to SAP or MONO. | STEREO. See “Setting the VCR Setup | ||
| 
 | 
 | Menu” on page 15. | ||
| 
 | 
 | 
 | 
 | |
Moisture Condensation
| Moisture condensation can occur: | In locations where moisture condensation may occur: | ||
| 
 | 
 | 
 | 
 | 
| • | When the DVD+VCR is moved from a cold place to a | • | Keep the DVD+VCR plugged into an AC power outlet | 
| 
 | warm place. | 
 | with POWER On. This will help prevent condensation. | 
| • | Under extremely humid conditions. | • | When condensation has occurred, wait a few hours | 
| 
 | 
 | 
 | for the DVD+VCR to dry before using it. | 
| 
 | 
 | 
 | 
 | 
34