Before Operation VCR Part On-Screen Display OSD

Select the desired menu with v/V button and then press SELECT/ENTER.

Before Operation - VCR Part

On-Screen Display (OSD)

Some of these functions will be displayed every time the VCR is operated.

❶ ❷		❸	❹ ❺

	PLAY	HI-FI	CH 4
	SP		STEREO
	SP		STEREO

JUL 5 , SAT 2:15 PM

❻❼

❶TAPE SPEED DISPLAY

Shows the current tape speed.

❷FUNCTION DISPLAY

Indicates the function in progress.

❸HI-FI DISPLAY

Indicates when this unit is playing back tape recorded with Hi-Fi.

❹CHANNEL DISPLAY

Indicates the selected channel (or LINE1, LINE2).

❺STEREO/SAP DISPLAY (MONO is not displayed) Shows the type of audio signal received by the VCR tuner.

❻DATE DISPLAY

Shows the current date. (Month/Date/Day of the week format)

❼CLOCK/COUNT/REMAIN DISPLAY

Shows the current time, the tape counter and remaining time on the tape.

Each press of the SELECT/ENTER changes the TV screen in the following sequence.

STOP	CH 4
SP	STEREO
JUL 5 , SAT	2:15 PM

2:15 PM

0:35:40

REM 1:58

Notes

The function displays can be seen displayed on the TV screen for 5 seconds.

The clock (or tape counter, tape remaining) mode will contin- ue until you press SELECT/ENTER.

The tape counter and the remaining tape length indicator appear only when a cassette is inserted. Also, the remaining tape length indicator appears after any tape operation.

EASY INFORMATION

If the Extended Data Service (XDS) signals are provided along with normal TV signal in your area or during play- back of a tape recorded with Extended Data Service (XDS) signals, the station ID, program title and program details are shown in the TV screen.

When viewing a channel with Extended Data Service (XDS) signals, press SELECT/ENTER then the station ID will appear on the TV screen. Press SELECT/ENTER again and the program details will appear on the TV screen. When viewing a tape recorded with Extended Data Service (XDS) signals, press SELECT/ENTER twice then the program title and program details will appear on the TV screen.

PROGRAM DETAILS

LENGTH: Indicates the run length of a program.

TIME REMAINING: Indicates the remaining time of a program.

RATING: Indicates the rating of the current program (N/A, G, PG, PG-13, R, NC-17, X and Not Rated). The rating N/A means that the motion picture ratings are not applicable to this program.

		CH 4	PROGRAM DETAILS
SP	WABC	STEREO
			“Home video”

			LENGTH	01:00
“Home video”			TIME REMAINING	00:26
			RATING	N/A
JUL	5 , SAT	2:15 PM


Easy Information Screen			Easy Information Screen
	(Station ID)		(Program details)

Setting the On-Screen Display

The SETUP, clock setting, and timer recordings are accessed conveniently with On-Screen Menu Displays that lead you through each step. The following pages describe the On-screen selections to be set.

Menu Selection

Your VCR allows remote control adjustment of several features.

1 Press MENU and the MAIN menu will appear.

Note

Menus remain on-screen for 3 minutes.

MAIN MENU

CLOCK SET (page 16)

PROGRAM (page 22)

TUNING (page 15)

SETUP (page 15)

3 Press MENU when finished.