Sanyo SCP-2700 VHS Hi-Fi Stereo System MTS Broadcast, Playback with Hi-Fi Stereo Audio Sound

Page 25
25
Press STOP (x) to stop recording.
7
Press MENU.
Set the desired recording speed (SP or SLP) by pressing SP/SLP.
Select the desired channel. The SAP should appear on the TV screen.
Press REC (z) once
You are now recording the program you see and hear on the TV.
3
4
5
6
If only STEREO appears on the TV screen.
The DVD+VCR can record in stereo onto the VHS Hi-Fi audio tracks when the BROADCAST TYPE option is in the STEREO position. The DVD+VCR will also record mono audio onto the mono audio track.
If only SAP appears on the TV screen. Set the BROADCAST TYPE option to SAP.
If STEREO/SAP appears on the TV screen
Use the BROADCAST TYPE option to select the desired recording mode (STEREO or SAP).
SAP (Second Audio Program) Recording
Some stations transmit a Second Audio Program, which is used for a second language or additional information. When the station broadcasts a Second Audio Program, follow the procedure below to record the SAP.
1 Insert a video cassette with the safety tab intact.
2 Set the BROADCAST TYPE option to SAP (SETUP menu).
Do this only if the SAP appears on the TV screen or you know the program will use the SAP.
STEREO
Lights up when a stereo broadcast is being received.
SAP
Lights up when a SAP BILINGUAL broadcast is being received.

Operation with tape (Continued)

VHS Hi-Fi Stereo System/

MTS Broadcast

This DVD+VCR is equipped with the VHS Hi-Fi audio sound system for recording and playback. The informa- tion below gives a brief description of Hi-Fi audio and how to record and play a tape in the Hi-Fi audio mode.

Playback with Hi-Fi Stereo Audio Sound

A stereo TV with AUDIO/VIDEO input jacks or a stereo audio system is required for correct stereo playback. To experience the full and rich stereo sound available with Hi-Fi recorded tapes, we recommend the connection of this unit to a home stereo audio system.

1

Set the AUDIO MODE option to HI-FI on the

SETUP menu .

2 Set the AUDIO OUTPUT option to STEREO position.

(STEREO) POSITION: The left channel sound (L) is heard from the left speaker and the right channel sound

(R) is heard from the right speaker.

(LEFT) POSITION: The left channel sound (L) is heard from both speakers.

(RIGHT) POSITION: The right channel sound (R) is heard from both speakers.

3 Press MENU.

4 Insert a cassette and press PLAY (H). Adjust volume at your stereo system.

MTS (Multi-Channel TV Sound)

This DVD+VCR will decode MTS stereo and bilingual (SAP) off-the-air broadcast sound signals. It also decodes stereo TV sound from local cable companies, as long as they operate on assigned cable frequencies and use the EIA-recommended MTS stereo/bilingual TV

sound system.

Multichannel TV Sound Indicator (MTS)

Shows On-screen as illustrated below when SELECT/ENTER is pressed.

One or both of the indicators will light, depending on the MTS broadcast.

TV screen

CH 4

STEREO/SAP

OPERATION

Image 25
Contents DVC-2700 Regulatory Information FCC Part Safety PrecautionsImportant Safety Instructions Table of Contents Remote Control Operation Range Remote control battery installationBefore Use Playable DiscsAbout Symbols PrecautionsSetting the Output Source Front Panel REC Display WindowRemote Control Rear Panel Connections Connecting Antenna/Cable TV toOptional, Preferred TV Connections Connections Basic TV ConnectionsRF coaxial connection Audio/Video connectionConnections Optional, Preferred TV Connections Accessory Audio/Video A/V Connections toDigital Multi-channel sound Before Operation VCR Part On-Screen Display OSD Setting the On-Screen DisplayMenu Selection Channel Selection Before Operation VCR Part Setting the VCR Setup MenuAuto Clock Set Before Operation VCR Part Setting the ClockManual Clock Set Press v/ V to choose the Clock menuGeneral Explanation Before Operation DVD PartOn-Screen Display On-screen display operationInitial Settings General Operation Before Operation DVD Part Initial SettingsSample Freq. Frequency Dolby DigitalDynamic Range Control DRC VocalChanging the 4-digit password Password DVD Setting your passwordIf you forget your 4-digit password Rating DVDSpecial Effect Playbacks Operation with tape Normal PlaybackOperation with tape Normal Recording Timer RecordingTo pause the recording To record one TV program while watching anotherOperation with tape Checking Erasing the Timer ProgramProgram Priority Checking the Recording Time Instant Timer RecordingTo extend the Recording Time Dubbing and EditingVHS Hi-Fi Stereo System MTS Broadcast Multichannel TV Sound Indicator MTSPlayback with Hi-Fi Stereo Audio Sound MTS Multi-Channel TV SoundAdditional Information Operation with tape Tape Counter Memory FeatureOperation with DVD Playing DVD General FeaturesMoving to another Title Moving to another ChapterOperation with DVD General Features Special DVD Features To stop playback at any other time, press Stop About MP3Operation with Audio CD and MP3 Discs Programmed Playback with Audio CD and MP3 Discs Programmed Playback CD MP3Erasing a Track from Program List Erasing the Complete Program ListSymptom Cause Correction TroubleshootingSecurely Moisture Condensation DVD+VCR is in Timer modeLanguage Code Language Code ListCountry Code Country Code ListVCR Specifications SpecificationsDVD Specifications General
Related manuals
Manual 138 pages 8.38 Kb