Sanyo SCP-2700 Operation with tape, Checking Erasing the Timer Program, Program Priority

Page 23

Operation with tape(Continued)

10

Use V to choose the SPEED option.

Use b/B to choose the desired recording

 

speed (AUTO, SP or SLP).

 

AUTO mode determines how long tape is left and

 

switches speed from SP to SLP, if necessary, to

 

complete recording the program. There will be some

 

picture and sound distortion at the point of the speed

 

change.

11

Use V to choose the REPEAT option.

Use b/B to choose the desired repeat (ONCE,

WEEKLY or DAILY).

ONCE event....for recording up to 8 programs on a

single day or over the days within a period of 1 year. WEEKLY event....for recording up to 8 programs on a

certain day of every week.

DAILY event....for recording up to 8 programs at the

same time(s) from Monday through Friday.

Tip

If the input data is wrong, use v to select the data and correct it using b/B.

12

Press MENU, the program will be memorized

at the DVD+VCR.

indicator lights in the display window.

If the program preset time is past, the PAST TIME PROGRAMMED message will appear on the TV screen. Return to the incorrect program and program it with the correct time.

If you had entered a past date, the timer recording will be performed on that date of the next year. Additional programs may be entered by repeating steps 1-12.

Cable Users: If your cable hookup is via a TV convert- er box, you can program multiple recordings only on the converter box output channel. This is because the converter determines what channel you view through your DVD+VCR.

Tip

If you have finished programming and you want to set the DVD+VCR to record the programs you have entered.

MAKE SURE YOU HAVE INSERTED A TAPE INTO THE DVD+VCR. The DVD+VCR is now set to record the preset programs.

Note

If the power fails or the DVD+VCR is unplugged from the AC outlet, the correct clock time and timer settings are kept in memory for approximately 3 seconds. After 3 seconds, the clock and program timer will be reset when power is restored. Reset the clock according to instructions.

After setting up a timer recording, recording will start if no other timer recordings are scheduled to occur at the same time (see “Program Priority” at right).

Checking (Erasing) the Timer Program

Programming can be checked whenever the DVD+VCR is turned on.

1Press MENU and the MAIN menu will appear.

2Use v/V to choose the PROGRAM menu.

Press SELECT/ENTER and the PROGRAM menu will appear.

3Use b/B to select a program you want to check or erase. If you want to erase the program, press

CLEAR.

4Press MENU to return to the TV screen.

Program Priority

If the starting and ending times of two or more timer recordings overlap on the

same day, priority is given to

the earliest recording. For

example, in the diagram at left Program number 2 will

not be recorded until Program number 1 is finished. The first part of Program number 2 will not be recorded. Likewise, Program number 3 will not be recorded until Program number 2 is finished, and so on.

OPERATION

23

Image 23
Contents DVC-2700 Regulatory Information FCC Part Safety PrecautionsImportant Safety Instructions Table of Contents Playable Discs Remote control battery installationRemote Control Operation Range Before UseSetting the Output Source PrecautionsAbout Symbols Front Panel REC Display WindowRemote Control Rear Panel Connections Connecting Antenna/Cable TV toAudio/Video connection Connections Basic TV ConnectionsOptional, Preferred TV Connections RF coaxial connectionDigital Multi-channel sound Accessory Audio/Video A/V Connections toConnections Optional, Preferred TV Connections Menu Selection Setting the On-Screen DisplayBefore Operation VCR Part On-Screen Display OSD Channel Selection Before Operation VCR Part Setting the VCR Setup MenuPress v/ V to choose the Clock menu Before Operation VCR Part Setting the ClockAuto Clock Set Manual Clock SetOn-screen display operation Before Operation DVD PartGeneral Explanation On-Screen DisplayInitial Settings General Operation Before Operation DVD Part Initial SettingsVocal Dolby DigitalSample Freq. Frequency Dynamic Range Control DRCRating DVD Password DVD Setting your passwordChanging the 4-digit password If you forget your 4-digit passwordSpecial Effect Playbacks Operation with tape Normal PlaybackTo record one TV program while watching another Timer RecordingOperation with tape Normal Recording To pause the recordingProgram Priority Checking Erasing the Timer ProgramOperation with tape Dubbing and Editing Instant Timer RecordingChecking the Recording Time To extend the Recording TimeMTS Multi-Channel TV Sound Multichannel TV Sound Indicator MTSVHS Hi-Fi Stereo System MTS Broadcast Playback with Hi-Fi Stereo Audio SoundAdditional Information Operation with tape Tape Counter Memory FeatureMoving to another Chapter General FeaturesOperation with DVD Playing DVD Moving to another TitleOperation with DVD General Features Special DVD Features To stop playback at any other time, press Stop About MP3Operation with Audio CD and MP3 Discs Erasing the Complete Program List Programmed Playback CD MP3Programmed Playback with Audio CD and MP3 Discs Erasing a Track from Program ListSecurely TroubleshootingSymptom Cause Correction Moisture Condensation DVD+VCR is in Timer modeLanguage Code Language Code ListCountry Code Country Code ListGeneral SpecificationsVCR Specifications DVD Specifications
Related manuals
Manual 138 pages 8.38 Kb