Sanyo SCP-2700 instruction manual Precautions, About Symbols, Setting the Output Source

Page 6

Before Use (Continued)

Precautions

Handling the unit

When shipping the unit

The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packaged at the factory.

When setting up the unit

The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. In this case, position the unit away from the TV, VCR, or radio, or turn off the unit after removing the disc.

To keep the surface clean

Do not use volatile liquids, such as insecticide spray, near the unit. Do not leave rubber or plastic products in contact with the unit for a long period of time. They will leave marks on the surface.

Cleaning the unit

To clean the cabinet

Use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit.

To obtain a clear picture

The DVD+VCR is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor.

Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.)

For details, please contact your nearest dealer.

Notes on Discs

Handling discs

Do not touch the playback side of the disc.

Hold the disc by the edges so that fingerprints will not get on the surface.

Do not stick paper or tape on the disc.

Storing discs

After playing, store the disc in its case.

Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sun- light, as there may be a considerable temperature increase inside the car.

Cleaning discs

Fingerprints and dust on the disc can cause poor pic- ture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the cen- ter out.

Yes No

Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records.

About Symbols

About the symbol display

” may appear on the TV screen during operation. This icon means the function explained in this owner’s manual is not available on that specific DVD video disc.

About the disc symbols for instructions

A section whose title has one of the following symbols are applicable only to those discs represented by the symbol.

DVD DVDs

CD Audio CDs.

MP3 MP3 Discs.

Setting the Output Source

You must select one of your output sources (DVD or VCR) to view on the TV screen.

If you want to view output source of DVD deck: Press DVD on the remote or DVD/VCR on the front panel until DVD indicator in the display window lights and output source of DVD deck is viewed on the TV screen.

If you want to view output source of VCR deck: Press VCR on the remote or DVD/VCR on the front panel until VCR indicator in the display window lights and output source of VCR deck is viewed on the TV screen.

Note

If you insert a disc while the DVD+VCR is in the VCR mode, the DVD+VCR will switch to DVD mode automatically.

If you insert a cassette tape without an erasure prevention tab intact while the DVD+VCR is in the DVD mode, the DVD+VCR will switch to VCR mode automatically.

6

Image 6
Contents DVC-2700 Safety Precautions Regulatory Information FCC PartImportant Safety Instructions Table of Contents Before Use Remote control battery installationRemote Control Operation Range Playable DiscsPrecautions About SymbolsSetting the Output Source Front Panel Display Window RECRemote Control Rear Panel Connecting Antenna/Cable TV to ConnectionsRF coaxial connection Connections Basic TV ConnectionsOptional, Preferred TV Connections Audio/Video connectionAccessory Audio/Video A/V Connections to Connections Optional, Preferred TV ConnectionsDigital Multi-channel sound Setting the On-Screen Display Before Operation VCR Part On-Screen Display OSDMenu Selection Before Operation VCR Part Setting the VCR Setup Menu Channel SelectionManual Clock Set Before Operation VCR Part Setting the ClockAuto Clock Set Press v/ V to choose the Clock menuOn-Screen Display Before Operation DVD PartGeneral Explanation On-screen display operationBefore Operation DVD Part Initial Settings Initial Settings General OperationDynamic Range Control DRC Dolby DigitalSample Freq. Frequency VocalIf you forget your 4-digit password Password DVD Setting your passwordChanging the 4-digit password Rating DVDOperation with tape Normal Playback Special Effect PlaybacksTo pause the recording Timer RecordingOperation with tape Normal Recording To record one TV program while watching anotherChecking Erasing the Timer Program Operation with tapeProgram Priority To extend the Recording Time Instant Timer RecordingChecking the Recording Time Dubbing and EditingPlayback with Hi-Fi Stereo Audio Sound Multichannel TV Sound Indicator MTSVHS Hi-Fi Stereo System MTS Broadcast MTS Multi-Channel TV SoundOperation with tape Tape Counter Memory Feature Additional InformationMoving to another Title General FeaturesOperation with DVD Playing DVD Moving to another ChapterOperation with DVD General Features Special DVD Features About MP3 To stop playback at any other time, press StopOperation with Audio CD and MP3 Discs Erasing a Track from Program List Programmed Playback CD MP3Programmed Playback with Audio CD and MP3 Discs Erasing the Complete Program ListTroubleshooting Symptom Cause CorrectionSecurely DVD+VCR is in Timer mode Moisture CondensationLanguage Code List Language CodeCountry Code List Country CodeDVD Specifications SpecificationsVCR Specifications General
Related manuals
Manual 138 pages 8.38 Kb