Changing Volume Lock, Programming Channel Lock

UNIVERSAL REMOTE CONTROL, ADVANCED OPERATION

DELETING A SINGLE LEARNING KEY

This process returns the key to its original pro- gramming for the mode you select. You can also delete learned programming by teaching a differ- ent function to the key (see “Programming a Learned Key”.)

NOTE: If more than 10 seconds pass between key press- es, the remote exits programming.

1.Press the mode key that you wish to remove the learned key from.

2.Press and hold SET until the LED blinks twice, then release.

3.Enter 9 7 6. The LED blinks twice.

4.Press the key containing the learned function to be deleted twice. The LED blinks twice and exits from programming.

DELETING ALL LEARNED KEYS IN A

SPECIFIC MODE

NOTE: If more than 10 seconds pass between key press- es, the remote exits programming.

1.Press and hold SET until the LED blinks twice, then release.

2.Press 9 7 6. The LED blinks twice.

3.Press a mode key twice (i.e., DVD, STB, or AUX) to clear all the learned keys for that mode. The LED blinks twice and exits from programming.

CHANGING VOLUME LOCK

The GXDB universal remote control comes preset to allow independent volume control of each selected device (Global Volume Unlock). However, you may change the Volume Lock setting to Global Volume Lock so that one device's volume controls volume in all other modes. After that, you can per- form Individual Volume Unlock on a selected device to set its volume control for independent operation or Global Volume Unlock to remove all volume locking.

LOCKING VOLUME CONTROL TO ONE MODE (GLOBAL VOLUME LOCK)

1.Press and hold SET until the red LED blinks twice, then release.

2.Enter 9 9 3, the LED blinks twice.

3.Press the mode key for the device you want to control (for example, TV.)

4.The LED blinks twice. Now when you press VOL+, VOL–, or MUTE, the selected device (for example, TV) controls the volume regardless of the current mode.

UNLOCKING A SINGLE DEVICE’S VOLUME CONTROL

1.Press the desired device mode key (TV, DVD, STB, or AUX).

2.Press and hold SET until the red LED blinks twice, then release.

3. Enter 9 9 3. The LED blinks twice.

4.Then press VOL–. The red LED blinks four times. Volume is independently controlled for the selected devices.

UNLOCKING ALL VOLUME CONTROL (RES- TORING GLOBAL UNLOCK)

1.Press and hold SET until the red LED blinks twice, then release.

2.Enter 9 9 3, the LED blinks twice.

3.Press VOL+.The LED blinks four times. Volume is independently controlled for all programmed devices.

PROGRAMMING CHANNEL LOCK

Channel control can be locked so that the GXDB remote controls a single device’s channel-chang- ing functions, regardless of operating mode. This is often enabled by users who watch all broadcast TV through one device (e.g., a cable set-top box). The affected keys are 1 – 0, CH▲, CH▼, and

RECALL.

LOCKING ALL CHANNEL CONTROLS TO ONE DEVICE

To lock all channel-control functions to a specific device, follow these steps:

1.Press the mode key that relates to the device that you use for channel changing control.

20 Need help? www.sanyoctv.com 1-800-877-5032