Sanyo DP42545 owner manual Digital Add-on Search, Antenna Selection Analog

Press the MENU key to display the Main menu.

CHANNEL SETUP OPTIONS (CONTINUED)

Digital Add-on Search

Use this feature to add new channels to the Digital Antenna Channel data- base. Also, use this feature to add channels when broadcast towers are in opposite directions from your location.

NOTE: Go to www.antennaweb.org and type in your zip code to obtain specific tower vector information.

Channel numbers will appear under the progress bar only when a channel is found.

1 Press the TUNER key to select the Digital Tuner.

2 Press the MENU key to display the Main menu.

3 Use the CURSOR ▲▼ keys to highlight the Channel category. Press ENTER.

Antenna Selection (Analog)

Use this feature to switch between Analog Off-air channels and Analog Cable channels.

NOTE: To ensure that all available chan- nels are included in the channel scanning loop, you should perform a Channel Search after switching between Off-air and Cable channels.

1 Press the TUNER key to select the Analog tuner.

4 Use the CURSOR ▲▼ keys to highlight the Digital Add-on Search option. Press ENTER.

5 Use the CURSOR ▼ key to choose Yes. Press ENTER.

NOTE: Turn your Antenna and repeat these steps for each direction in which there are transmitting towers.

2

3 Use the CURSOR ▲▼ keys to highlight the Channel category. Press ENTER.

4 Use the CURSOR ▲▼ keys to highlight the Antenna Selection option. Press ENTER.

5 Use the CURSOR ▲▼ keys to choose CABLE or VHF / UHF.

6 Press the EXIT key to return to normal TV viewing.

➠

➠

18