Screen Saver, Picture Rotation Setup saver

SETUP MENU OPTIONS (CONTINUED)

Screen Saver

Displaying a still picture for a long time may cause an “afterimage” or “ghost” on the screen. To neutralize this situation, a Picture Rotation func- tion is provided.

Use this feature to protect the Plasma screen from “afterimage.”

If an afterimage occurs, use the White Pattern feature immediately to repair the panel. The more severe the after- image, the longer the curing process may take. It may be impossible to repair all cases of afterimage burn.

The sooner you remove a still picture and activate White Pattern, the more likely it is that the panel can be repaired.

NOTE: Afterimage (or image burn) is not covered under warranty.

1 Press the TUNER key to select the Analog Tuner. (NOTE: The Screen Saver setting is available only from the Analog Main menu. However, it functions in all modes.)

2 Press the MENU key to display the Main menu.

3 Use the CURSOR ▲▼ keys to highlight the Setup category. Press ENTER.

Picture Rotation Setup (saver)

4 Use the CURSOR ▲▼ keys to highlight the Screen Saver option. Press ENTER.

5 Use the CURSOR ▲▼ keys to highlight Picture Rotation. Press

ENTER.

6 Use the CURSOR ▲ ▼ keys to select On, then use the ▲▼ keys to highlight Cycle Time. Then use the ▲ ▼ keys to set a cycle time of 15 Minutes, 30 Minutes, or 60 Minutes.

7 Press the EXIT key to return to normal TV viewing.

➠

White Pattern Setup (panel repair)

4 Use the CURSOR ▲▼ keys to highlight the Screen Saver option.

	Press ENTER.
	Use the CURSOR ▲▼ keys to
5 highlight White Pattern.				Press
	ENTER.
6	Use the ▲▼ keys to highlight
	Display Time. Then use the ▲ ▼
	keys to set a display time of
	10 Minutes,	30	Minutes, or
	60 Minutes, depending on the
	severity of the afterimage.
7	Use the ▲▼ keys to highlight
	White Pattern. Then use the
	CURSOR ▲ ▼ keys to select On.
NOTE: Pressing		any	key	except

VOLUME ▲▼ and AUDIO will cancel the curing process and return the TV to normal viewing.


	➠
	➠		➠