HANDLING PRECAUTIONS
•Handle the Plasma TV carefully when installing. Do Not Drop.
•Locate the set away from heat, excessive dust, and direct sunlight.
NOTE: When the Plasma TV is not used for a long period of time, dark dots may be observed. This is a charac- teristic of the Plasma display. If this occurs, turn the Plasma TV On and leave it on about one hour. These dots will gradually disappear.
•Throughout the installation process, handling by more than two people is recommended.
•When removing the feet, use a working space that is larger than the screen size. The work surface must be flat and covered with a soft cloth or blanket to protect the screen surface.
•Before placing the Plasma TV face down, make sure there are no objects under the screen. Leaving any object may cause damage on the screen surface.
Hand Slots
CARE AND CLEANING
CLEANING THE PLASMA TV
The surface of the cabinet can be damaged if not properly maintained. Many common household aerosol sprays, cleaning agents, solvents, and polishes will cause perma- nent damage to the fine surface.
1.Unplug the power cord before cleaning the Plasma TV.
2.Gently wipe the screen and cabinet with dry soft cloth.
The screen is likely to be damaged if it is not maintained properly. Do not use hard objects like a hard cloth or paper. Do not use solvents or abrasives.
CARING FOR THE PLASMA TV
Do not bump or scratch the panel surface as this causes flaws on the surface of the screen.
Do not display a still image on the screen for a long time. Otherwise, an afterimage or ghost may appear on a part of the panel. To prevent this symptom, use the “Screen Saver” function of the Plasma TV. See page 26.
There may be some tiny black points and/or blight points on the Plasma Display Panel. These points are normal.
NOTES: Never spray liquids on the screen.
Do not use benzene, thinner, or any volatile substances to clean the Plasma TV. These chemicals may damage the cabinet finish.
5