Dish Network DishPVR 501, DishPVR 508, 121716 Remote Control Modes, Regular Modes, Limited Mode

Page 7

REMOTE CONTROL MODES

REGULAR MODES

You can set the remote to four different modes to control the receiver or other devices.

Set up the remote to control a device like a TV or a VCR. See Set Up the Remote Control on page 6 for what to do.

Note: The remote comes already set up to control the receiver, unless you have changed the address on your receiver.

Use the remote control’s mode buttons, SAT (“satellite” receiver), TV, VCR (for a VCR or a DVD player), and AUX (“auxiliary,” for a cable TV box, a tuner, a second TV, a second VCR, a DVD player, or an audio amplifier) to set the remote to the right mode for the device. To change the mode, press the button for the device you want the remote to control. The mode button stays lit for two seconds to show you’ve set the remote to that mode.

LIMITED MODE

You can program your remote control in limited mode to keep from accidentally changing the channel on your TV or VCR. When you use the remote to control your TV in limited mode, you will only be able to use the POWER, MUTE, and VOLUME buttons. Also, when you use the remote to control your VCR in limited mode, you will only be able to use the POWER and VCR function buttons. Set Up the Remote Control on page 6 has a step that tells the remote control to go into limited mode.

Note: Limited mode is not used with cable boxes or amplifiers.

121716

5

Image 7
Contents Page Regulatory Factors Safety InstructionsWireless Remote Control InstallationContents of this User Guide Remote Control Batteries Remote Control BasicsRemote Control Signals UHF and IR Stray UHF signals can block signals from the remote control Install AN AttenuatorLimited Mode Remote Control ModesRegular Modes SET UP the Remote Control Remote Control SetupScan for Device Codes Check the Device Codes Change the Address To set the remote to control the device’s volume Switch Between TV and Device Volume ControlControl the Receiver Remote Control ButtonsFavorite Lists Program Guide, Browse Banner, or Themes list open View Button 121716 Press the Record button to start recording a program Control a TV or a Second TV Press either Power button to turn the TV on or off Use these buttons to change channels on the TV Control a VCR or a Second VCR or a DVD Player Use these buttons to change channels on the VCR Control a Cable TV BOX Use these buttons to change channels on the cable box Control a Tuner or Amplifier Press this button to turn on or off the sound TV Codes Device CodesJVC VCR Codes Cable TV BOX Codes DVD Player Codes What’s What’s Wrong What You Can Do Happening Troubleshoot the Remote ControlTo use. See Remote Control Setup United States of America Limited WarrantyPost Receipt Exchange Program Advance Exchange ProgramIf YOU Need Help Accessory WarrantyIndex Part Number