Sanyo DSR-3009 manual Program REC SET, Menu Setting Procedures

Menu Setting Procedures

3. PROGRAM REC SET

When more than one camera is connected to the digital video recorder, the camera rate (unique rec rate for each camera) can be set separately for each camera. In addition, you can make up to four programs that include settings such as the method of combining the images from each recording camera and individual camera rates. You can specify the appropriate program when making [TIMER SET] and [RECORDING MODE SET] menu settings.

1 Use the menu (1) to specify a program number.
P-1 to P-4
2 Use the menu (2) to specify the cameras that are	1
to be used for recording from the numbers of the
connected cameras that are being displayed on the	2
screen (DSR-3009 model: 1-9; DSR-3016 model: 1-
16), and set the camera rate for each camera
selected.	3
• If a camera is not to be recorded: Select “OFF”.

•If a camera is to be recorded: Set the camera rate.

Default setting DSR-3009 model: 0.556 FPS

DSR-3016 model: 0.313 FPS Screen example for DSR-3009 model

The camera rate values that appear in the menu lists will vary depending on the number of channels connected. The maximum value for REC RATE in PROGRAM REC mode is 30 fps, so the values in the table will be this maximum value divided by the number of channels, and comprises the upper limit for the setting.

3 Click [SAVE] to complete the setting.

When the setting is completed, the available time for normal recording and the number of alarm recordings that are possible under the conditions that have been set will be displayed for reference (3).

1

2

3

4 You can repeat the above procedure to program up	Screen example for DSR-3016 model
to a maximum of four different patterns.

English 9