Sanyo DSR-3009 manual Motion Detection Search, Specify the motion sensor search conditions

Page 30

Search Mode Operations

5. MOTION DETECTION SEARCH

If a motion sensor has been set to detect movement in a particular camera view, and images for that view have been saved in the normal recording area or alarm recording area, you can search for those images that have changed as a result of movement by an intruder, for example, and play back those images.

1

2

3

4

5

6

Select [MOTION DETECTION SEARCH] from the [SEARCH] menu.

The MOTION DETECTION SEARCH screen will be displayed.

Select the recording area to search for images from the [SEARCH FROM] menu.

•ALARM: Only alarm recording area images will be searched.

•NORMAL: Only normal recording area images will be searched.

•ALARM AND NORMAL: Images in both the alarm recording area and the normal recording area will be searched.

Select the channel (camera number) to search for images from the [MULTIPLEXER CHANNEL] menu.

If the multiplexer function has not been used and only one channel is available, [--] will be displayed.

Click the [SET] button. The recording start and recording end times for the images to be searched will be displayed in the [START] and [END] menus respectively. To refine the range over which to search, use the menu to adjust the [START] or [END] settings, and then click the [SET] button to apply the changes.

The search results will be displayed in a message box.

Specify the motion sensor search conditions.

• Sensor position

The MOTION SENSOR SET screen will be displayed, and it will be divided up into an 8 (H) × 10 (W) grid. Click the position where you wish to set the focus for the motion sensor. A red sensor setting mark will appear at that position. (If you click a sensor position again, the sensor setting will be canceled.)

•Sensor level

Select from the menu. The lower the number, the higher is the sensitivity.

Click the [PREVIEW] button to confirm the image in the PREVIEW screen.

Images in the specified time range in which the sensor has detected movement will be searched and displayed on the PREVIEW screen.

1

2

34

5

6

7

8

1SEARCH FROM

This selects the recording areas to search in.

2MULTIPLEXER CHANNEL

Channel (camera number) for images to be searched

3START/END

This selects the recording start and end times for the images to be searched.

4SET

This sets the search conditions.

5MESSAGE BOX

This shows the search results for images that satisfy the search conditions.

•SEARCHING: Searching for images.

•FOUND: Images satisfying the search conditions have been found.

•IMAGES NOT FOUND: No images that satisfy the search conditions were found.

6MOTION SENSOR SET Motion sensor setting screen

7MOTION SENSOR LEVEL Sets the sensor sensitivity. (OFF, 1 to 10)

8PREVIEW

Search image preview display.

7 After confirming that the image found is the one you wish to play back, click the PREVIEW screen.

The images starting from the point that the alarm occurred will be played back in a single-screen display.

English

29

Page 29 Page 31
Image 30
Page 29 Page 31
Contents DSR-3016 DSR-3009 Contents Symbols used in this manual Viewing ImagesBasic Specifications for Network Control Network SettingsNetwork Control Functions Switching to Control by Computer Network ControlWhen control is switched to the main unit When the connection is forcibly canceled from the main unitComputer display When disconnected from the network Network Control Displays That Appear While ConnectedOperating Panel and Operation Permissions Settings Menu ConfigurationMenu Selection Method Daylight SAVING/EXT. Clock SET Menu Setting ProceduresClock SET Daylight SavingMenu Setting Procedures Program REC SETTotal capacity display Recording area resetRecording Area SET Capacity display for each recording areaClick Save to complete the sub-menu settings or changes Recording Conditions SETRemaining Disk Warning Normal REC Mode SET Menu Setting Procedures Start Timer SETWeek StopAlarm REC Mode SET Click Save to complete the holiday settings or changesHoliday SET Alarm Recording Set the duration for alarm recording from the Duration menuSelect the recording cycle from the REC Rate menu PRE-ALARM Recording Alarm and SensorAlarm or Sensor Alarm Duration SET Alarm Type Default setting on Type of alarm recordingDisplay SET Buzzer SET Network SET HDD SET Power FAILURE/USED TimeClick Save to complete the Playback Drive menu settings Playback DriveEnglish Viewing Images Viewing Live ImagesPlaying Back Recorded Images Playback Mode Operations Specifying the Number of Display ScreensViewing Images Image Adjustment On-screen Display ItemsSearch for images by using the search mode screen Basic Search OperationsSearch Menus Search Mode Operations Alarm SearchAlarm Thumbnail Search Archive Area Search Search Mode OperationsTIME/DATE Search Select TIME/DATE Search from the Search menuMotion Detection Search Specify the motion sensor search conditionsClick the Start button Saving Recorded ImagesEnter the number of images in the HOW Many Box Playback AreaSaving Recorded Images Click OK in the dialog box and then saveImage Viewer Screen Page

DSR-3009 specifications

The Sanyo DSR-3009 is a high-performance digital satellite receiver that has garnered attention for its impressive array of features and capabilities. Designed primarily for satellite television applications, the DSR-3009 stands out due to its advanced technology and user-friendly characteristics, making it a preferred choice for both consumers and installers.

One of the key features of the Sanyo DSR-3009 is its robust multi-channel capability. It supports a wide range of satellite signals, allowing users to access a vast selection of channels, including international broadcasts and niche programming. This flexibility ensures that viewers can enjoy a diverse array of content tailored to their interests.

The DSR-3009 is built with advanced signal processing technology that enhances picture and sound quality. With support for high definition broadcasting, users can enjoy crystal-clear visuals and superior audio that elevate their viewing experience. Its built-in upscaling technology converts standard-definition content to high definition, ensuring that all programming is presented in the best possible quality.

Another noteworthy feature of the Sanyo DSR-3009 is its user-friendly interface. The on-screen menu is intuitive, making navigation simple for users of all skill levels. The device also offers customizable settings, allowing users to tailor their viewing experience to their preferences. Additionally, the DSR-3009 is equipped with a program guide that helps users keep up with what's on air, making it easier to plan viewing schedules.

For tech-savvy users, the DSR-3009 supports various connectivity options, including HDMI and USB ports, which facilitate integration with other devices. Users can connect external storage devices to record their favorite shows and potentially access additional content through firmware updates.

The Sanyo DSR-3009 also features robust built-in security measures to prevent unauthorized access to premium content. This ensures that users can enjoy peace of mind while accessing various subscription services.

Overall, the Sanyo DSR-3009 is a versatile digital satellite receiver that combines cutting-edge technology with user-friendly design. Its wide channel selection, superior audio and video quality, and advanced connectivity options make it an excellent choice for anyone looking to enhance their satellite television experience. Whether for home entertainment or professional installation, the DSR-3009 delivers exceptional performance and reliability.
Top Page Image Contents