Sanyo DSR-3009 manual Viewing Images, Viewing Live Images, Playing Back Recorded Images

Page 24

Viewing Images

Live images and recorded images can both be viewed while monitoring is in progress at any time when required.

Operations such as switching between live images and recorded images that are being played back and changing the display screen do not have any effect on other operations such as timer recording and alarm recording.

■Viewing Live Images

Click the Gbutton on the operating panel to pause playback. The display will then change to viewing live images.

■Playing Back Recorded Images

You can play back images either by specifying the images to be played back or without specifying images.

Specifying images

Playback method

When not specifying

Click the Hbutton on the operating panel. The screen will change to the playback

images

mode screen, and playback of images in the normal recording area and the alarm

 

recording area will be carried out in the order that they were recorded.

 

• If playing back recorded images for the first time after being recorded, or if the digital

 

video recorder has been reset, playback will start from the first image recorded.

 

• When playing back images for the second and subsequent time, playback will start

 

from the point where the previous playback session ended.

 

 

When specifying

You can use the search function to search for the images that you would like to play

images

back from all images that have been recorded in all of the different areas of the hard

 

disk.

 

When you search for images to be played back in search mode and then select an

 

image, the display will changes automatically to the playback mode screen and the

 

selected images will be played back. Refer to “Search Mode” in the next section for

 

further details.

 

 

The screen display may become momentarily unstable or playback may appear to pause when the following operations are carried out, but this is normal and is not the sign of a malfunction.

•When playback is carried out continuously between the normal recording area and the alarm recording area, the images may flicker momentarily when switching between the two areas.

•If you use normal playback or fast-forward and rewind playback during alarm recording or during continuous playback between the normal recording area and alarm recording area, the images may appear to freeze at times.

English

23

Page 23 Page 25
Image 24
Page 23 Page 25
Contents
DSR-3016 DSR-3009 Contents Symbols used in this manual Viewing ImagesBasic Specifications for Network Control Network SettingsNetwork Control Functions Switching to Control by Computer Network ControlWhen the connection is forcibly canceled from the main unit Computer display When disconnected from the networkWhen control is switched to the main unit Network Control Displays That Appear While ConnectedOperating Panel and Operation Permissions Settings Menu ConfigurationMenu Selection Method Menu Setting Procedures Clock SETDaylight SAVING/EXT. Clock SET Daylight SavingMenu Setting Procedures Program REC SETRecording area reset Recording Area SETTotal capacity display Capacity display for each recording areaClick Save to complete the sub-menu settings or changes Recording Conditions SETRemaining Disk Warning Normal REC Mode SET Menu Setting Procedures Timer SET WeekStart StopAlarm REC Mode SET Click Save to complete the holiday settings or changesHoliday SET Alarm Recording Set the duration for alarm recording from the Duration menuSelect the recording cycle from the REC Rate menu PRE-ALARM Recording Alarm and SensorAlarm or Sensor Alarm Duration SET Alarm Type Default setting on Type of alarm recordingDisplay SET Buzzer SET Network SET Power FAILURE/USED Time Click Save to complete the Playback Drive menu settingsHDD SET Playback DriveEnglish Viewing Images Viewing Live ImagesPlaying Back Recorded Images Playback Mode Operations Specifying the Number of Display ScreensViewing Images Image Adjustment On-screen Display ItemsSearch for images by using the search mode screen Basic Search OperationsSearch Menus Search Mode Operations Alarm SearchAlarm Thumbnail Search Search Mode Operations TIME/DATE SearchArchive Area Search Select TIME/DATE Search from the Search menuMotion Detection Search Specify the motion sensor search conditionsSaving Recorded Images Enter the number of images in the HOW Many BoxClick the Start button Playback AreaSaving Recorded Images Click OK in the dialog box and then saveImage Viewer Screen Page