Sanyo DSR-3009 manual Network SET

Menu Setting Procedures

14. NETWORK SET

When the digital video recorder is connected to a network, NETWORK SET is used to make settings beforehand from the main unit, but the settings that have been specified from the main unit can also be changed from the computer.

However, when network settings are changed, the digital video recorder will be momentarily disconnected from the network and control wills witch to the digital video recorder, so the network settings will need to be changed as necessary at the computer also. (See p. 3)

IP ADDRESS (1)

This enables the IP address for the digital video recorder to be reset.

SUBNET MASK (2)

This enables the subnet mask for the digital video recorder to be reset.

GATE WAY (3)

This enables the gateway for the digital video recorder to be reset.

PORT (4)

This enables the port number for the digital video recorder to be reset.

The setting range is from 1 to 65535 (Default setting: 80).

If the port is set to a value other than the default value of “80”, add a “:” followed by the port number to the end of the IP address when typing in the URL.

Example of URL if the port is set to “81”

http://192.168.0.1:81/

PASSWORD SETTING (5)

This enables the passwords for each user level to be reset. (See p. 4)

User level		1	2	3
User name		ID1	ID2	ID3
Available	Monitoring live images	m	m	m
menus	Monitoring and
	searching for recorded		m	m
	images
	Starting and stopping
	recording, timer			m
	recording, changing
	main unit settings, etc.
Password (Default value)		1111	2222	3333

The password can consist of 4 to 8 alphanumeric characters.

NETWORK SPEED (6)

This enables the network speed to be reset.

NO LIMIT/64/128/256/512/1024 (kbps)

When reset from the main unit, the default setting (NO LIMIT) is restored.

1

2

43

5

6

Click [SAVE] to complete the NETWORK menu settings (or changes) that are displayed on the screen.

20 English