Runco CX-40HD, CX-46HD Installation Considerations, Wall-Mounting the Crystal Series LCD Display

Installation

Proper installation of your Crystal Series LCD Display will ensure the highest possible picture quality. Whether you are installing the Crystal Series LCD Display temporarily or permanently, you should take the following into account to ensure that it performs optimally.

You can either place the Crystal Series LCD Display on a table or in an entertainment center, or mount it on a wall.

If you do decide to wall-mount the Crystal Series LCD Display, ensure that the wall-mount bracket is installed according to the instructions included with it. The wall must be capable of supporting a redundant weight factor three (3) times the weight of the display, or be reinforced.

Runco recommends that this be done by a custom installation specialist.

Use only the Runco-approved wall-mount kit designed for your

Note display.

3.3 Installation Considerations

Wall-Mounting the Crystal Series LCD Display

In general, minimize or eliminate light sources directed at the display. Contrast ratio in your	Ambient Light
images will be noticeably reduced if light directly strikes the display, such as when a shaft
of light from a window or floodlight falls on the image. Images may then appear washed
out and less vibrant.
Other considerations and tips that can help improve your installation:	Other Considerations
• Keep the ambient temperature constant and below 35°C (95°F). Keep the display away
from heating and/or air conditioning vents. Changes in temperature may cause drifts in
the display circuitry, which may affect performance.
• Keep the Crystal Series LCD Display away from devices that radiate electromagnetic
energy such as motors and transformers. Common sources of these include slide
projectors, speakers, power amplifiers and elevators.

Runco CX-40HD/CX-46HD Owner’s Operating Manual 15