Installation
Use a standard |
|
theater control/automation system (if present) to the | Connection |
LCD Display; see Figure |
|
For more information about using this connection, refer to Serial Communications on |
|
page 51. |
|
To PC or
Automation/
Control
System
Male
Connector Pin Assignments:
2 | Receive Data |
3 | Transmit Data |
5 | Ground |
1, 4, 6, 7, 8, 9 | Not Connected |
Rear Panel
Figure 3-11. RS-232 Control System Connection
Runco | 23 |