Runco CX-40HD, CX-46HD manual Crystal Series LCD Display Specifications

7. Specifications

Table 7-1lists the Crystal Series LCD Display specifications.

Table 7-1. Crystal Series LCD Display Specifications

Native Resolution:	1920 x 1080
Screen Size:	CX-40HD = 40 in. (diagonal)
	CX-46HD = 46 in. (diagonal)
Screen Aspect Ratio:	16:9
Available Aspect Ratios:	4:3, Letterbox, 16:9 (Anamorphic), VirtualWide™
DTV Compatibility:	480i/p, 576i/p, 720p, 1080i, 1080p
ISF Settings:	Yes
Contrast Ratio:	1000:1
Data/Graphics Compatibility:	Refer to Table 7-2
Vivix Processing:	3:2 or 2:2 pull down
Inputs:	Multiple input combinations with up to
	(4)	Composite Video
	(2)	S-Video
	(2)	Component Video
	(2) HDMI w/HDCP
	(1)	RGB (15-pin D-sub)
	(1)	RS-232 Control
	(5)	Analog Audio
		(4 stereo RCA pairs + 3.5-mm stereo mini jack)
	(1)	RF Antenna
	(1)	CATV (75-ohm coaxial)
Outputs:	(1)	Composite Video
	(1)	Analog Audio (stereo RCA pair)
	(1)	Stereo headphone (3.5-mm stereo mini jack)
	(1)	Digital Audio (S/PDIF, RCA coaxial)
	(1)	Digital Audio (TosLink optical)
Audio System:	10W RMS x 2, L/R two-way Detachable Speaker System
Tuner:	NTSC/ATSC Stereo (PAL as monitor only), HDTV,
	PIP/PBP, Parental Control (V-Chip), Closed Caption
Discrete IR Control:	Source, power and aspect ratios
Power Requirements:	100 to 240 VAC, 50/60Hz
Power Consumption:	CX-40HD = 270W
	CX-46HD = 310W
Operating Environment:	40ºF to 95ºF (5ºC to 35ºC);
	20% to 80% humidity (non-condensing)
Dimensions:	CX-40HD = see Figure 7-1
	CX-46HD = see Figure 7-2

7.1

Crystal Series LCD Display Specifications

Runco CX-40HD/CX-46HD Owner’s Operating Manual 57