Perle Systems 5500316-13 manual MCR-MGT Management Module, Making Connections to Management Module

MCR-MGT Management Module

Your SMI Media Converter comes with a powerful MCR- MGT Management Module that allows you to configure, monitor and control your SMI Media Converter.

Features

∙Management access through AAA security such as RADIUS, TACACS+, LDAP, Kerberos and NIS.

∙IPv4 and IPv6 network environments.

∙Central management and configuration through SNMPv3 as well as SNMPv1/2.

∙Management module access via Browser, Telnet or SSH over 10/100/1000 Mbps Ethernet.

∙Cisco pin-compatible RJ-45 console port on Management module for easy cabling connections.

∙Local Event logging and Syslog

∙Quickly restore manufacturing configuration settings.

Making Connections to the

Management Module

Connecting To The LAN

Depending on the speed at which you plan to operate your Ethernet connection, locate compliant copper cables with male, RJ-45 connectors installed at both ends.

Connect the RJ-45 cable between the MCR-MGT Ethernet port and the hub or switch port which will connect the module to your Ethernet LAN.

Note: The MCR-MGT module supports Auto MDI/MDIX detection which allows for the use of a straight-through or cross-over Ethernet cable.

PERLE SMI MEDIA CONVERTER GUIDE 10