Perle Systems 5500316-13 manual Technical Specifications for the SMI Media Converter, Dimensions

Page 20

Technical Specifications for the SMI Media Converter

The following applies to all SMI-xxxx Media Converters: Max Power Input/Consumption: 12 V DC/15 Watts

Operating Temperature:

 

0°C - 50°C (32°F - 122°F)

 

 

 

Storage Temperature:

 

-25°C - 70°C (-13°F - 158°F)

Operating Humidity:

 

5% to 90% non-condensing

Storage Humidity:

 

5% to 95% non-condensing

Operating Altitude:

 

Up to 3,048 m (10,000 ft)

Weight without cards:

 

0.566 kg (1.25 Lbs.)

 

 

 

Weight with cards:

 

0.722 kg (1.59 Lbs.)

 

 

 

Dimensions

 

 

 

 

175 mm 145 mm by 23 m

 

 

 

 

 

 

 

 

6.9” in. by 5.7” in. by .90” in.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MTBF (Hours)

 

 

MTBF (Hours)

 

 

 

Model

 

 

Power

 

 

Current

 

 

excluding

 

 

including

 

 

 

 

 

Consumption

 

 

(@ 12 V DC)

 

 

Power

 

 

Power

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

adapter

 

 

adapter

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SMI-1000

 

4.98 watts

 

0.42 amps

248,259

 

169,698

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SMI-1000-SFP

 

 

4.98 watts

 

 

0.42 amps

 

 

268,167

 

 

178,770

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SMI-1110

 

4.1 watts

 

0.34 amps

238,087

 

164,883

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SMI-1110-SFP

 

 

4.1 watts

 

 

0.34 amps

 

 

256,533

 

 

173,524

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SMI-100

 

3.98 watts

 

0.33 amps

245,769

 

168,532

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SMI-110

 

 

4.1 watts

 

 

0.34 amps

 

 

246,403

 

 

168,829

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PERLE SMI MEDIA CONVERTER GUIDE 20

Image 20
Contents Perle SMI Media Converter Installation Guide Introduction OverviewSPF Getting to know your SMI Media Converter Unpacking your SMI Media ConverterFront and Rear Panel Components Adding or Removing Modules InstallationPowering up the SMI Media Converter Perle SMI Media Converter Guide Attaching the Grounding Lug Attaching the Power Cord Strain Relief ClipGrounding the SMI Chassis Optional Perle SMI Media Converter Guide Features Connecting To The LANMCR-MGT Management Module Making Connections to Management ModuleConnecting To The Console Port MCR-MGTConfiguring the Management-MGT Module Perle SetIP UtilitySerial Console Port Perle SMI Media Converter Guide LED Status for the Management Module ALM AlarmPWR Power LKC Copper -Link/Activity 100/1000Troubleshooting Loopback ModeGeneral No connectivityCannot connect to MCR-MGT Module using an IP address MCR-MGT PWR LED is REDMCR-MGT PWR LED is Blinking Green Cannot connect serially to MCR-MGT ModulePerle SMI Media Converter Guide Technical Specifications for the SMI Media Converter DimensionsEthernet Copper Cabling Compliance Information FCCDetails can be found at