Perle Systems 5500316-13 manual LED Status for the Management Module, ALM Alarm, PWR Power

Page 15

LED Status for the Management Module

The MCR-MGT module has four status LEDs, which are used to monitor the operational status of the MCR-MGT Module in the network and the status of the MCR1900 Chassis.

ALM - Alarm

Off - No faults detected.

Red - A severe or critical level fault has been detected in the system.

PWR - Power

Green - Power is on and the module is in normal operation mode.

Green blinking - The MCR-MGT Module is initializing. The bootup should complete within 1 minute, at which time the PWR LED should go solid green.

Off - The MCR-MGT module has no power.

Red - Unrecoverable hardware error on MCR-MGT module.

PERLE SMI MEDIA CONVERTER GUIDE 15

Image 15
Contents Perle SMI Media Converter Installation Guide Overview IntroductionSPF Unpacking your SMI Media Converter Getting to know your SMI Media ConverterFront and Rear Panel Components Installation Powering up the SMI Media ConverterAdding or Removing Modules Perle SMI Media Converter Guide Attaching the Power Cord Strain Relief Clip Grounding the SMI Chassis OptionalAttaching the Grounding Lug Perle SMI Media Converter Guide Making Connections to Management Module FeaturesConnecting To The LAN MCR-MGT Management ModuleMCR-MGT Connecting To The Console PortPerle SetIP Utility Configuring the Management-MGT ModuleSerial Console Port Perle SMI Media Converter Guide ALM Alarm PWR PowerLED Status for the Management Module 100/1000 LKC Copper -Link/ActivityNo connectivity TroubleshootingLoopback Mode GeneralCannot connect serially to MCR-MGT Module Cannot connect to MCR-MGT Module using an IP addressMCR-MGT PWR LED is RED MCR-MGT PWR LED is Blinking GreenPerle SMI Media Converter Guide Dimensions Technical Specifications for the SMI Media ConverterEthernet Copper Cabling FCC Compliance InformationDetails can be found at