Perle Systems 5500316-13 manual Perle SMI Media Converter Guide

Page 9

2.Attach the power cord relief clip to the chassis and secure with the provided screw.

3.Plug the power cord into the AC power connector at the rear of the chassis.

4.Plug the other end of the power cord into an appropriate power outlet.

PERLE SMI MEDIA CONVERTER GUIDE 9

Image 9

Contents Perle SMI Media Converter Installation Guide Overview IntroductionSPF Unpacking your SMI Media Converter Getting to know your SMI Media ConverterFront and Rear Panel Components Installation Powering up the SMI Media ConverterAdding or Removing Modules Perle SMI Media Converter Guide Attaching the Power Cord Strain Relief Clip Grounding the SMI Chassis OptionalAttaching the Grounding Lug Perle SMI Media Converter Guide Connecting To The LAN FeaturesMCR-MGT Management Module Making Connections to Management ModuleMCR-MGT Connecting To The Console PortPerle SetIP Utility Configuring the Management-MGT ModuleSerial Console Port Perle SMI Media Converter Guide ALM Alarm PWR PowerLED Status for the Management Module 100/1000 LKC Copper -Link/ActivityLoopback Mode TroubleshootingGeneral No connectivityMCR-MGT PWR LED is RED Cannot connect to MCR-MGT Module using an IP addressMCR-MGT PWR LED is Blinking Green Cannot connect serially to MCR-MGT ModulePerle SMI Media Converter Guide Dimensions Technical Specifications for the SMI Media ConverterEthernet Copper Cabling FCC Compliance InformationDetails can be found at