Perle Systems 5500316-13 manual Introduction, Overview

Introduction

Perle SMI Media Converters provide seamless high-speed managed integration of Ethernet to Fiber networks.

Overview

This guide contains instructions necessary for the installation and operation of the Perle SMI Media Converter. This Media Converter consists of the MCR200 chassis, a MCR-MGT Management Module and one Media Converter Module.

The fiber connection can be either single mode (SM) or multimode (MM) and can operate over different wavelengths and distances, depending on the model selected (see table below).

100/110 Models
(xxx)	Connector	Mode	Distance	Wavelength
1000/1110 Models	(cc)			(TX/RX)
(xxxx)
SMI-xxx-M2cc02	SC/ST/LC	MM	2 km	1310 /1310 nm
			1.2 mi.
SMI-xxx-S2cc20	SC/ST/LC	SM	20 km	1310/1310 nm
			12.4 mi.
SMI-xxx-S1SC20U	SC	SM	20 km	1310/1550 nm
			12.4 mi.
SMI-xxx-S1SC20D	SC	SM	20 km	1550/1310 nm
			12.4 mi.
SMI-xxx-S2cc40	SC/ST/LC	SM	40 km	1310/1310 nm
			24.9 mi.
SMI-xxx-S1SC40U	SC	SM	40 km	1310/1550 nm
			24.9 mi
SMI-xxx-S1SC40D	SC	SM	40 km	1550/1310 nm
			24.9 mi
SMI-xxx-S2cc80	SC/ST/LC	SM	80 km	1550/1550 nm
			49.7 mi
SMI-xxx-S2cc120	SC/ST/LC	SM	120 km	1550/1550 nm
			74.6 mi
SMI-xxxx-M2cc05	SC/ST/LC	MM	550 m	850/850 nm
			1804 ft.
SMI-xxxx-M2cc2	SC/ST/LC	MM	2 km	1310/1310 nm
			1.2 mi.

PERLE SMI MEDIA CONVERTER GUIDE 2