Memorex MVDP1085 manual DVD Operation, Playback of a DVD, Important Notes

27

CONTINUED ON THE NEXT PAGE

DVD OPERATION

IMPORTANT NOTES:

•“ ” will appear on the screen during operation if you try to access a function that is not available on the disc.

•Some discs may take a few seconds to load.

•If a disc is inserted incorrectly, dirty, damaged, or is not present at all, “NO DISC” will appear in the display.

•Always hold the disc without touching either of its surfaces. When inserting a disc, position it with the printed title side facing up, align it with the guides and place it in its proper position.

•It is important that you read the manual that accompanies the DVD disc as there are features that are on this DVD player that cannot be used with certain DVDs. There are also extra features that are different for each DVD disc, so they are not explained in this owner’s manual.

•If the unit is in the Stop mode, Pause mode or if there is no disc in the disc tray, the screen saver will appear on the screen after three minutes.

•Make sure that the AV IN/OUT switch is in the OUT position. Otherwise, the display will not show a picture.

PLAYBACK OF A DVD

1

Slide the POWER ON/OFF switch to the ON position to turn the unit on; the POWER indicator will light.

NOTE: To turn this unit off, simply slide the POWER ON/OFF switch back to the OFF position.

2 1

2

Slide the Open Door switch to the right to open the unit. Press1 the DISC COMPARTMENT DOOR PUSH OPEN button to open the disc tray, “OPEN” will appear2on the screen. Insert a disc with the label side facing up on the disc tray.