Memorex MVD4540B owner manual Setting the video channel / Setting the language, Enter

MENU

TIMER REC SET

AUTO REPEAT ON OFF

SAPON OFF

CH SETUP

SYSTEM SETUP

〈+/-/ENOISETER/MENU〉

SYSTEM·+/LANGUAGE/IDIOMA/LAGUENOCLOCK-/ENTER/MENUSETUPBACKGROUNDÒONOFF

Press POWER to turn on the DVD/VCR.

Setting the video channel / Setting the language

Setting the video channel

To view playback of a recorded tape or DVD disc, or to watch a program selected by the VCR's channel selector, the TV must be set to channel 3 or 4 (video channel).

POWER	EJECT	OPEN/	VCR/DVD
		CLOSE
1	2	3	DISPLAY/CALL
4	5	6	INPUT SELECT/
			PROGRESSIVE
7	8	9	0
	CH
TRACKING/			TRACKING/
SET			SET
–			+
	SELECT/
	ENTER
	CH
DVD MENU	SETUP/	CLEAR/	RETURN
	VCR MENU	CANCEL
MARKER	ZOOM	TOP MENU REPEAT A-B
AUDIO/	JUMP/	ANGLE/	CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER
TIMER REC	SUB TITLE/	PLAY MODE/	TV/VCR
	ATR	SPEED

REW/SEARCH PLAY SEARCH/F.FWD

INDEX/SKIPSTOP SKIP/INDEX

REC/OTR SLOW PAUSE/STILL

NOTES:

•When shipped from factory, the video channel is set to CH 3.

•If the unit does not operate properly, or No key operation (by the unit and/or the remote control): Static electricity, etc., may affect the player's operation. Disconnect the AC power cord, then connect it again.

•Both the VCR and the DVD have their own menu option (See page 34).

•If no buttons are pressed for more than 60 seconds, the MENU screen will return to normal TV-operation automatically.

18

When a TV is connected with the 75 ohm coaxial cable only.

1 Press and hold 3 or 4 on the remote control for 3 seconds in the standby mode to select CH 3 or 4. The selected

channel number will flash on the display for about 4 seconds.

2 Turn ON the TV and set to CH 3 or 4 to correspond with the channel selected in step 1.

3

4 Press VCR/DVD to select the VCR mode. The VCR indicator on the front panel will light.

5 Press TV/VCR to select the VCR position. The VCR indicator will appear in the display.

6 Select any channel to receive a TV station in your area. The channel number will appear on the screen for about 4 seconds.

For a push-button TV tuner

If CH 3 or 4 corresponding to the video channel cannot be tuned on your TV, proceed as follows: set the VCR 3/4 channel selector and the TV to CH 3 or 4, play back a prerecorded tape and tune the TV to receive a sharp color picture from the video cassette recorder. Refer to your TV owner's manual for details.

Setting the language

You can choose from three different languages (English, French and Spanish) for the on-screen displays.

1 Press VCR MENU.

The VCR menu screen will appear. Press SET + or – to select the “SYSTEM SETUP” menu, then

press ENTER.

If you use the unit for the first time and press VCR MENU, instead of the main menu screen on the right the “SYSTEM SETUP” menu screen in step 2 may appear.

2 Press SET + or – to select the “LANGUAGE” option, then press

ENTER.

3 Press SET + or – to select the desired language: English (EN- GLISH), Spanish (ESPAÑOL) or French (FRANCAIS), then press

ENTER.

4 Press VCR MENU until the MENU screen is cleared.

2C51001AE (16-19) 18 18/11/03, 2:38 PM