Memorex MVDP1072 manual Language/Audio Channel Selection, Press Audio button

Page 25

BASIC OPERATION

Direct Selection Playback Function by Number Buttons

DVD SVCD VCD CD

1. Insert disc and press NUMBER buttons to select tracks for play.

Press the NUMBER button 1-9 to direct select the track if the track number is less than 10. For example: to select the seventh track:

7

Press the +10 button and then the NUMBER buttons 0-9 to direct select a track if the track number is 10 or higher. For example: to select the 16th track:

10 + 6

+10 6

Press the +10 button twice and then the NUMBER buttons 0-9 to select a track if the track is 20 or higher.

NUMBER

NOTE

This function is effective only when the PBC mode is off when playing VCD or VCD2.0 discs. When the PBC mode is on, this function is void and you should press the RETURN button to return to the main menu to select a track. If you cannot select the track by the number buttons, turn the PBC On or OFF, then try again.

Language/Audio Channel Selection

DVD SVCD VCD CD

1. Press AUDIO button.

You may select the language you desire when playing multi-language DVD, SVCD discs with multi-language options.

DVD disc

AUDIO 1/2:

AUDIO 2/2:

SVCD disc:

AUDIO 1

AUDIO 2

AUDIO 4

AUDIO 3

20

Image 25
Contents User’s Guide Important Safety Instructions Safety Instructions Contents Function Setup Brief Introduction to DVD PrefaceOn this Unit Audio/Video Features FeaturesSvcd Compatible Disc TypesControl Button Locations and Explanations Control Button Locations and Explanations MENU/PBC Button Remote Control IllustrationBattery Installation How to use the Remote ControlInstalling Battery Pack Connecting to Power SupplyConnecting to a TV set System Connections Connecting to an Ordinary Audio SystemConnecting to an Amplifier with Dolby Digital Decoder Connecting to an Amplifier with DTS Digital Decoder Audio/Video In AUX Playback Connect the player to the power supplyPlease refer to page9Press OPEN/CLOSE to open the disc lid Close the disc lidPause/Step Playback TV System Selection NTSC/PALPress PAUSE/STEP button in playback status OSD On Screen Display To restore playback, press the Play buttonPress OSD button Press Volume button on TV set or Amplifier to adjust volume KEY/Volume ControlPress Volume button on the remote control of this unit DVD Menu PlaybackMain menu displays on TV screen PBC PlayBack Control FunctionsPress Audio button Language/Audio Channel SelectionResume audio output MuteSlow Playback Fast PlaybackPress FWD and the player starts fast forward playback Press REV and the player starts fast reverse playbackRepeat the Selected Section Repeat PlaybackPress A-B for the third time Angle Selection Subtitle SelectionPress Subtitle to select the desired language Press Angle and the TV screen displaysPlayback from a Desired Point Power Spectrum MeterPSM graphic equalizer Picture Quality Setting To exit the virtual keyboard, press Function Select again Virtual KeyboardPress UP/DOWN arrows to select the desired item Press BROWSER, the screen displays as followsTo exit the browser interface, press Browser again MP3 and Jpeg File Playing Playing Jpeg File Playing MP3 FilePlays a disc with both MP3 and Jpeg files Other Basic Operating Means When the button is invalid, the TV screen displaysPress SETUP. The TV screen displays Function SetupPress Setup to exit the setup menu General SettingsScreen saver Turn the screen saver function on or off Video SetupSharpness Used to set the sharpness of video output EQ type To set EQ modes Audio SetupSound Field To set different sound field effects Audio To set the prefered audio language when playing Initial SetupTV Type To set the output video system of this player PBC To set the PBC statusUseful notes Others TroubleshootingCD-DA MP3 Specifications525/60 TermsDVD-R SIGNAL-TO-NOISE Ratio Code Language Name Language Code ListOthers Page Memcorp, Inc Weston, FL