Memorex MVDP1072 manual Useful notes

Page 43

FUNCTION SETUP

6.Parental : Set the parental control ratings to prevent children from watching restricted contents. (The disc must support this function.)

Optional settings: KID, G, PG, PG-13, PGR, R, NC17, ADULT, OFF.

Default: OFF.

NOTE

The parental control system is password protected. We suggest you change the password from the default to a new password only you will know.

7.PASSWORD: Set a four digit password to enable you to change the parental control ratings.

Default: 7890.

OLD PASSWORD

NEW PASSWORD

CONFIRM PWD

OK

8.DEFAULT: Restores all settings to the default value except for the parental control and password settings.

Useful notes

In order to prolong the life of your player, we recommend waiting at least 30 seconds after switching it off before turning the unit back on.

Turn off the power when the unit isn't being used.

Only use the supplied power adaptor. Incorrect voltage will either keep the player from operating correctly or will permanantly damage your unit.

Some functions of the player may not be applicable to some discs.

If the player halts occasionally, please turn it off and turn it on again.

This player cannot play some SVCD discs with the VCD format.

We suggest you minimize the volume before using the Audio Output.

38

Image 43
Contents User’s Guide Important Safety Instructions Safety Instructions Contents Function Setup Brief Introduction to DVD PrefaceOn this Unit Audio/Video Features FeaturesSvcd Compatible Disc TypesControl Button Locations and Explanations Control Button Locations and Explanations MENU/PBC Button Remote Control IllustrationBattery Installation How to use the Remote ControlInstalling Battery Pack Connecting to Power SupplyConnecting to a TV set System Connections Connecting to an Ordinary Audio SystemConnecting to an Amplifier with Dolby Digital Decoder Connecting to an Amplifier with DTS Digital Decoder Audio/Video In AUX Close the disc lid Connect the player to the power supplyPlease refer to page9Playback Press OPEN/CLOSE to open the disc lidPause/Step Playback TV System Selection NTSC/PALPress PAUSE/STEP button in playback status OSD On Screen Display To restore playback, press the Play buttonPress OSD button DVD Menu Playback KEY/Volume ControlPress Volume button on TV set or Amplifier to adjust volume Press Volume button on the remote control of this unitMain menu displays on TV screen PBC PlayBack Control FunctionsPress Audio button Language/Audio Channel SelectionResume audio output MutePress REV and the player starts fast reverse playback Fast PlaybackSlow Playback Press FWD and the player starts fast forward playbackRepeat the Selected Section Repeat PlaybackPress A-B for the third time Press Angle and the TV screen displays Subtitle SelectionAngle Selection Press Subtitle to select the desired languagePlayback from a Desired Point Power Spectrum MeterPSM graphic equalizer Picture Quality Setting To exit the virtual keyboard, press Function Select again Virtual KeyboardPress UP/DOWN arrows to select the desired item Press BROWSER, the screen displays as followsTo exit the browser interface, press Browser again MP3 and Jpeg File Playing Playing Jpeg File Playing MP3 FilePlays a disc with both MP3 and Jpeg files Other Basic Operating Means When the button is invalid, the TV screen displaysPress SETUP. The TV screen displays Function SetupPress Setup to exit the setup menu General SettingsScreen saver Turn the screen saver function on or off Video SetupSharpness Used to set the sharpness of video output EQ type To set EQ modes Audio SetupSound Field To set different sound field effects PBC To set the PBC status Initial SetupAudio To set the prefered audio language when playing TV Type To set the output video system of this playerUseful notes Others TroubleshootingCD-DA MP3 Specifications525/60 TermsDVD-R SIGNAL-TO-NOISE Ratio Code Language Name Language Code ListOthers Page Memcorp, Inc Weston, FL