Memorex MVDP1072 manual TV System Selection NTSC/PAL, Pause/Step Playback

Page 21

BASIC OPERATION

TV System Selection (NTSC/PAL)

DVD

SVCD

VCD

CD

MP3

Set the DVD player to match the TV set.

1.Press P/N button on the remote control to select PAL if the TV set is set to PAL. The TV screen should now show:

PAL

2.Press P/N button on the remote control to select NTSC if the TV set is set to NTSC. The TV screen should now show:

NTSC

3.Press P/N button unitl you see "AUTO" if your TV set is a multi-system TV. The TV screen should now show:

AUTO

P/N

NOTES

You cannot change the TV system when a DVD is playing. PAL/NTSC/AUTO can only be selected when the DVD player is stopped.

Some disc functions may be dependant on the video system you use. Consequently, some functions may not be available in PAL that are available in NTSC.

We suggest you set your unit and TV set to "AUTO" mode.

Your DVD player's display system automatically detects the video system (NTSC or PAL).

Pause/Step Playback

DVD

SVCD

VCD

CD

MP3

1. Press PAUSE/STEP button in playback status.

Press PAUSE/STEP button once to pause playback, display on TV screen:

2.Press PAUSE/STEP button in pause mode, each press moves one frame forward. Press PAUSE/STEP button continuously to step playback.

16

Image 21

Contents User’s Guide Important Safety Instructions Safety Instructions Contents Function Setup Brief Introduction to DVD PrefaceOn this Unit Audio/Video Features FeaturesSvcd Compatible Disc TypesControl Button Locations and Explanations Control Button Locations and Explanations MENU/PBC Button Remote Control IllustrationBattery Installation How to use the Remote ControlInstalling Battery Pack Connecting to Power SupplyConnecting to a TV set System Connections Connecting to an Ordinary Audio SystemConnecting to an Amplifier with Dolby Digital Decoder Connecting to an Amplifier with DTS Digital Decoder Audio/Video In AUX Playback Connect the player to the power supplyPlease refer to page9Press OPEN/CLOSE to open the disc lid Close the disc lidTV System Selection NTSC/PAL Pause/Step PlaybackPress PAUSE/STEP button in playback status To restore playback, press the Play button OSD On Screen DisplayPress OSD button Press Volume button on TV set or Amplifier to adjust volume KEY/Volume ControlPress Volume button on the remote control of this unit DVD Menu PlaybackMain menu displays on TV screen PBC PlayBack Control FunctionsPress Audio button Language/Audio Channel SelectionResume audio output MuteSlow Playback Fast PlaybackPress FWD and the player starts fast forward playback Press REV and the player starts fast reverse playbackRepeat Playback Repeat the Selected SectionPress A-B for the third time Angle Selection Subtitle SelectionPress Subtitle to select the desired language Press Angle and the TV screen displaysPlayback from a Desired Point Power Spectrum MeterPSM graphic equalizer Picture Quality Setting To exit the virtual keyboard, press Function Select again Virtual KeyboardPress BROWSER, the screen displays as follows Press UP/DOWN arrows to select the desired itemTo exit the browser interface, press Browser again MP3 and Jpeg File Playing Playing MP3 File Playing Jpeg FilePlays a disc with both MP3 and Jpeg files Other Basic Operating Means When the button is invalid, the TV screen displaysPress SETUP. The TV screen displays Function SetupPress Setup to exit the setup menu General SettingsVideo Setup Screen saver Turn the screen saver function on or offSharpness Used to set the sharpness of video output Audio Setup EQ type To set EQ modesSound Field To set different sound field effects Audio To set the prefered audio language when playing Initial SetupTV Type To set the output video system of this player PBC To set the PBC statusUseful notes Others TroubleshootingCD-DA MP3 Specifications525/60 TermsDVD-R SIGNAL-TO-NOISE Ratio Code Language Name Language Code ListOthers Page Memcorp, Inc Weston, FL