Marantz VP-11S2 manual Picture Adjust

Picture Adjust

Picture quality in each of the picture modes can be adjusted to your liking and those adjustments can be saved in memory.

–Gamma setting

To change the type of Gamma curve, set the Picture Mode (☞ p.24) to User (1 – 9). Select “Gamma” from the displayed menu followed by the desired gamma curve (A, B, C, D, E, Theater, Standard or Dynamic).

ABCDE

ENGLISH

User 1

Picture Adjust

Fine Menu 1

Fine Menu 2

Input Signal

RGB/HD Adjust

HDMI

Display

OSD/Blanking

Config.

Gamma	A
Contrast	0
Brightness	0
Color	0
Tint	0
Sharpness	0
Color Temp.	3
Lamp Mode	Normal
Iris	1

TheaterDynamic

– Color Temp. (Color Temperature)
1 :	Red comes out strong. Color temperature is about 5250 K.
2 :	Red is mildly strong. Color temperature is about 5800 K.
3 :	Normal. Color temperature is about 6500 K.
4 :	Blue is mildly strong. Color temperature is about 7500 K.

Item	Adjustments
Gamma	A, B, C, D, E, Theater,
	Standard, Dynamic
Contrast	-50Ô0Ô 50
	(Weak)		(Default)			(Strong)
Brightness	-50Ô0Ô 50
	(Dark)		(Default)			(Bright)
Color	-50Ô0Ô 50
	(Light)		(Default)				(Deep)
Tint	R10Ô 0Ô G10
	(Purple)		(Default)			(Green)
Sharpness	0							50
Color Temp.	1	2 3		4		5 HB
(Color Temperature)	(Red)				(Blue)
Lamp Mode	Normal, Economy
Iris		1		2		3
	Contrast		(High)					(Low)
	Brightness (Low)							(High)
	Sets the lens and illumination
	aperture.

5 :	Blue comes out strong. Color temperature is about 9300 K.
HB : High Bright : Display brightest image.

NOTES:

-To adjust picture quality, set the index to a mode other than the default. See “Picture Mode”. (☞ P.24)

-The Gamma cannot be set unless User (1 - 9) is set for the Picture Mode (☞ P.24).

-Tint cannot be adjusted for RGB input. For details, see “Functions by Signal.” (☞ P.22-23)

-The settings made in Picture Adjust are saved in the currently selected Picture Mode index.

25