Getting Started
First setup panel
Setting | Function | Adjusting |
|
|
|
LCD Sleep | Sets how long the touchscreen | Tap the LCD button and use |
| stays on. | the Left and Right buttons. |
LCD Light | Sets how long the backlight of | Tap the LCD Light button and |
| the touchscreen stays on. | use the Left and Right buttons. |
Button Light | Sets how long the backlight of | Tap the Button Light button and |
| the | use the Left and Right buttons. |
| buttons stays on. |
|
Touch | Selects the beep volume (Off, 1,2,3) | Tap the LCD button. |
| for Touch Screen buttons |
|
Button | Selects the beep volume (Off, 1,2,3) | Tap the LCD button. |
| for Hard buttons. |
|
Note: | Use the down scroll arrow to move to the second | |
| setup panel. |
|
Second setup panel |
| |
Setting | Function | Adjusting |
Mode Menu Active | Deactive - Turns off the Mode Menu Icon so the user cannot access | |
| SETUP, LEARN, LABEL etc. Good when children are | |
| Active - Normal. Anyone can program or adjust the Remote by tapping on | |
| the Mode Menu icon. |
|
SPECIAL NOTE | To access the MODE menu after deactivating it, press and hold the spot | |
| where the Mode Menu icon used to be for five or six seconds. | |
Macro Menu Active | DeActive - Turns off Macro Navigation.Tap the LCD button | |
| Active- Turns on Macro Navigation. | repeatedly. |
Device Menu Active | DeActive - Turns off Device Navigation.Tap the LCD button | |
| Active- Turns on Device Navigation. | repeatedly. |
Calibrate | Calibrates the touchscreen. | Tap the Calibrate button and |
|
| follow the |
|
| instructions. |
Revert* | Reverts the RC9200/5200 to | Tap the Revert button and |
| the Revert 2.01 configuration | follow the |
| (see pages 15, 17 and 57). | instructions. |
*The Revert button will only appear if one change has been made to the RC9200/520o
User Guide |
14